auszookers.com • View topic - WANTED G16B Air Flow meter, three pin

Board index » Shift It And Find It » I Want it I Want it I want it

WANTED G16B Air Flow meter, three pin

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Sun Oct 30, 2011 4:55 am

after a three pin air flow meter cheers for any help guys, also this prob unlikely but anyone got a spare pulley off a G16B water pump?? mine got none

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Sun Oct 30, 2011 5:27 am

I have this one from the G16A import engine I'm fitting to my Vitara.
It bolted up and lined up perfectly with my G16B water pump.
Both engines had identical water pumps.
I chose to use the pulley from my dead Vitara motor,
as this one has a very slight increase in diametre.
Happy to post from Melbourne, if you don't have any luck local.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Sun Oct 30, 2011 9:32 am

Slightly bigger diameter shouldnt be a problem I wouldn't think, how much bigger is it??

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Sun Oct 30, 2011 9:37 am

strop wrote:

Slightly bigger diameter shouldnt be a problem I wouldn't think, how much bigger is it??

I will go measure it brb

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Sun Oct 30, 2011 9:42 am

My vit one
(rough measurement as its dark out there)
is just over 12cm diameter.

The other is a bit less than 13cm diameter

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Sun Oct 30, 2011 9:49 am

Should be fine, how much you want mate??

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Sun Oct 30, 2011 9:58 am

strop wrote:

Should be fine, how much you want mate??

just what ever postage costs,
be between $6 and $12

My scales aren't very accurate.

To post I need (in pm)
Name
address
post code.

We have a holiday Tuesday,
so not sure if post office is open Monday.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Sun Oct 30, 2011 10:04 am

pm thanks mate.

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Sun Oct 30, 2011 10:10 am

pm thanks mate.

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Tue Nov 01, 2011 12:15 am

Ive got a AFM. Not sure if its 3 pin. Ill look when i get home

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Tue Nov 01, 2011 12:53 am

Awesome, that would be great. I got the pulley sorted just need an air flow meter now.

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Tue Nov 01, 2011 4:35 am

Its 5 pin. Sorry mate

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Tue Nov 01, 2011 5:57 am

That's alright hopefully someone has one

strop

Joined: Wed Jun 08, 2011 12:27 pm
Posts: 112
Location: millicent

Posted: Wed Nov 02, 2011 7:41 am

bump

Page 1 of 1

[ 14 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum