It is currently Wed Aug 05, 2026 3:27 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 39 posts ]  Go to page Previous  1, 2
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Fri Nov 18, 2011 8:48 pm 
Reply with quote Top  
If the carbon cannister is old or stuffed,
pressure built up in tank can force fuel out of the cannister,
when parked in the heat.
Took me a while to work that problem out.

A strong smell of fuel is not a good thing.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
User avatar

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Post Posted: Sat Nov 19, 2011 2:49 am 
Reply with quote Top  
yeah ill probably pull it!

_________________
THINKING BEFORE POSTING!!!

 Profile  

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Sat Nov 19, 2011 3:02 am 
Reply with quote Top  
SSSIERA wrote:
yeah ill probably pull it!


at a guess i would say that ya do a fair bit of that already. 8O

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

 Profile  

Offline
User avatar

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Post Posted: Thu Nov 24, 2011 3:22 pm 
Reply with quote Top  
hello ladies and gents, im having more carby problems! well atleast i think!
i decided to have a go at doing the jets myself and managed to succeed! but occasionaly (its done it thre times since yesterday) it has been not liking getting started, i havent figured out comthing in common but with all three times but each one has gotten progressively worse.
the webber now has
110 primary
125 secondary
170 for the first air corrector
and the second is 160!
it might need a bit of a tune aswell can anyone tell me how to do this!
ive mucked around with tuning on bikes but am a little scared to do so myself with the webber! without instructions
cheers troy!

_________________
THINKING BEFORE POSTING!!!

 Profile  

Offline
az supporter
az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Post Posted: Thu Nov 24, 2011 4:58 pm 
Reply with quote Top  
Without knowing what model Weber Carb you are using, i guessed its a 32/36 downdraft model...
I just googled 32/36 Weber Carby tuning... from what i have read tuning a weber is a bit hit and miss, takes trial and error...

But here is a few places i found with info -
http://www.racetep.com/webtechpage.html

And here is a Team Swift forum with pictures and links to tuning a Weber -
http://www.teamswift.net/viewtopic.php?f=8&t=38446

Downloadable PDF and info -
http://performancecarbscience.com/

 Profile WWW  

Offline
User avatar

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Post Posted: Thu Nov 24, 2011 5:01 pm 
Reply with quote Top  
cheers
and yeah its a 32/36 dgv webber

_________________
THINKING BEFORE POSTING!!!

 Profile  

Offline
User avatar

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Post Posted: Thu Nov 24, 2011 10:59 pm 
Reply with quote Top  
SSSIERA wrote:
hello ladies and gents, im having more carby problems! well atleast i think!
i decided to have a go at doing the jets myself and managed to succeed! but occasionaly (its done it thre times since yesterday) it has been not liking getting started, i havent figured out comthing in common but with all three times but each one has gotten progressively worse.
the webber now has
110 primary
125 secondary
170 for the first air corrector
and the second is 160!

it might need a bit of a tune aswell can anyone tell me how to do this!
ive mucked around with tuning on bikes but am a little scared to do so myself with the webber! without instructions
cheers troy!


Who told you to run these jets?

_________________
Lil Foot!
http://tiny.cc/gtsw1

 Profile  

Offline
User avatar

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Post Posted: Thu Nov 24, 2011 11:26 pm 
Reply with quote Top  
JrZook wrote:
SSSIERA wrote:
hello ladies and gents, im having more carby problems! well atleast i think!
i decided to have a go at doing the jets myself and managed to succeed! but occasionaly (its done it thre times since yesterday) it has been not liking getting started, i havent figured out comthing in common but with all three times but each one has gotten progressively worse.
the webber now has
110 primary
125 secondary
170 for the first air corrector
and the second is 160!

it might need a bit of a tune aswell can anyone tell me how to do this!
ive mucked around with tuning on bikes but am a little scared to do so myself with the webber! without instructions
cheers troy!


Who told you to run these jets?


holy carby specialist (state importer) around the corner sold me the primary and secondary jets! but the air correctors were already in it! it origionaly had 140 in the secondary and idk what was in the primary. i hadnt even looked at the air correctors yet! i can go get some more now though its only a 5 min walk! old guy there is realy helpfull!

_________________
THINKING BEFORE POSTING!!!

 Profile  

Offline
User avatar

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Post Posted: Thu Nov 24, 2011 11:30 pm 
Reply with quote Top  
SSSIERA wrote:
JrZook wrote:
SSSIERA wrote:
hello ladies and gents, im having more carby problems! well atleast i think!
i decided to have a go at doing the jets myself and managed to succeed! but occasionaly (its done it thre times since yesterday) it has been not liking getting started, i havent figured out comthing in common but with all three times but each one has gotten progressively worse.
the webber now has
110 primary
125 secondary
170 for the first air corrector
and the second is 160!

it might need a bit of a tune aswell can anyone tell me how to do this!
ive mucked around with tuning on bikes but am a little scared to do so myself with the webber! without instructions
cheers troy!


Who told you to run these jets?


holy carby specialist (state importer) around the corner sold me the primary and secondary jets! but the air correctors were already in it! it origionaly had 140 in the secondary and idk what was in the primary. i hadnt even looked at the air correctors yet! i can go get some more now though its only a 5 min walk! old guy there is realy helpfull!


What exhaust system do you have? IMO that jetting is on the lean side. Make sure you keep an eye out on your spark plug colors.

_________________
Lil Foot!
http://tiny.cc/gtsw1

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 39 posts ]  Go to page Previous  1, 2

Jump to:  


Who is online

Users browsing this forum: No registered users and 878 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours