It is currently Fri Jul 17, 2026 5:57 am
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 24 posts ] 
Author Message

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sun Jun 19, 2011 3:12 am 
Reply with quote Top  
I have some 30mm coil spacers for a Jimny. These will lift a jimny by 30mm when installed above coils.


They also fit the front of a GV or Vitara and will lift it about 60mm
Not sure it they fit coily sierra.

$60 for a pair or $100 for all 4. Plus $15 post Australia wide.


Image

Image

_________________
B4T


Built by me to be driven like a rental


Last edited by Built4thrashing on Thu Nov 17, 2011 10:34 pm, edited 1 time in total.
 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed May 19, 2010 9:20 am
Posts: 268
Location: Sale victoria

Post Posted: Sun Jun 19, 2011 6:43 am 
Reply with quote Top  
All four sold to me if they fit a coily Anyone no?

_________________
Sj80,31 claws, lift, winch, 6.5

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sun Jun 19, 2011 10:55 am 
Reply with quote Top  
:rambo:

_________________
B4T


Built by me to be driven like a rental


Last edited by Built4thrashing on Sun Jun 19, 2011 11:39 am, edited 1 time in total.
 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed May 19, 2010 9:20 am
Posts: 268
Location: Sale victoria

Post Posted: Sun Jun 19, 2011 11:26 am 
Reply with quote Top  
UnSold sorry bft

_________________
Sj80,31 claws, lift, winch, 6.5

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Mon Jun 20, 2011 8:08 pm 
Reply with quote Top  
I still have these. Want them home so I can buy something else for the GV.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Sep 19, 2010 9:30 am
Posts: 1163
Location: Wahroonga NSW
Vehicle: 89 Vit. The Desert Rat...

Post Posted: Mon Jun 20, 2011 10:27 pm 
Reply with quote Top  
Do they only fit the front of a Vit?

I'd need something for the back as well.

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Tue Jun 21, 2011 12:44 am 
Reply with quote Top  
coils are smaller in the rear of a GV and Vit. These wont fit sorry.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Wed Nov 16, 2011 8:16 am 
Reply with quote Top  
bump.

Forgot i still had these.


Price drop to $100 for the 4.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Wed Nov 16, 2011 11:07 am 
Reply with quote Top  
my coils appear same front and rear.
I switched my first set front to rear without issue.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
User avatar

Joined: Wed Sep 14, 2011 11:40 am
Posts: 57
Location: Mailtand

Post Posted: Wed Nov 16, 2011 5:48 pm 
Reply with quote Top  
So they will fit a lwb vitara or not?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Wed Nov 16, 2011 8:01 pm 
Reply with quote Top  
Shorty_34 wrote:
So they will fit a lwb vitara or not?

Hard to say from photo.
Rear of Vit needs twice the size of front,
for the same lift,
because of the inboard spring position of front.
(I have 25mm in front and 50mm in rear = 50mm lift both ends)

I see from photo they have a spring locating groove,
min e don't,
that could be the difference.

Bruce makes coil spacers, he may have the answer.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Wed Nov 16, 2011 10:40 pm 
Reply with quote Top  
I know they dont fit the rear of a GV. They do fit the front but will lift the front by 60mm. a tad too much when combined with 40mm lift springs.

Not sure about the Vits Might have to pay chris a visit to see how they are different

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Wed Sep 14, 2011 11:40 am
Posts: 57
Location: Mailtand

Post Posted: Thu Nov 17, 2011 4:09 am 
Reply with quote Top  
christover1 wrote:
Shorty_34 wrote:
So they will fit a lwb vitara or not?

Hard to say from photo.
Rear of Vit needs twice the size of front,
for the same lift,
because of the inboard spring position of front.
(I have 25mm in front and 50mm in rear = 50mm lift both ends)

I see from photo they have a spring locating groove,
min e don't,
that could be the difference.

Bruce makes coil spacers, he may have the answer.


Righto awsome, sorry I dont know many people on here yet, so who is bruce?

 Profile  

Offline
User avatar

Joined: Fri Oct 23, 2009 10:30 pm
Posts: 257
Location: Brisbane North
Vehicle: 02 GV

Post Posted: Thu Nov 17, 2011 6:19 am 
Reply with quote Top  
on my vit i was able to swap front to rear

on my gv i can't. rears are slightly smaller in diameter.

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Thu Nov 17, 2011 8:50 am 
Reply with quote Top  
bailey08 wrote:
on my vit i was able to swap front to rear

on my gv i can't. rears are slightly smaller in diameter.


Ok then that asnwers that.

These will fit a Vitara.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Thu Nov 17, 2011 10:38 pm 
Reply with quote Top  
lots of interest in these so first in gets them.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Post Posted: Thu Nov 17, 2011 11:03 pm 
Reply with quote Top  
they will fit the rear of a sj80

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

 Profile WWW  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Thu Nov 17, 2011 11:22 pm 
Reply with quote Top  
jonno_racing wrote:
they will fit the rear of a sj80


NFI. you tell me as i dont own or have one to check. Does a SJ80 use the same coil spacers as a jimny,vitara or GVfronts?
If they do then id say they would.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Post Posted: Thu Nov 17, 2011 11:41 pm 
Reply with quote Top  
Built4thrashing wrote:
jonno_racing wrote:
they will fit the rear of a sj80


NFI. you tell me as i dont own or have one to check. Does a SJ80 use the same coil spacers as a jimny,vitara or GVfronts?
If they do then id say they would.


that was ment to say they WILL sorry i dont want them, just helping with the sale mate

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

 Profile WWW  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Nov 18, 2011 7:39 am 
Reply with quote Top  
Sold pending payment

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Sun Nov 06, 2011 12:36 am
Posts: 146
Location: Melbourne, VIC
Vehicle: 02 Suzuki Jimny

Post Posted: Mon Dec 12, 2011 12:00 am 
Reply with quote Top  
I assume that payment went through alright mate? Otherwise i'm interested.

TF

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Mon Dec 12, 2011 12:38 am 
Reply with quote Top  
yes these are sold.

BUT



i found a 30mm spacer lift for a Vitara in the cuboard

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
User avatar

Joined: Sun Nov 06, 2011 12:36 am
Posts: 146
Location: Melbourne, VIC
Vehicle: 02 Suzuki Jimny

Post Posted: Mon Dec 12, 2011 1:08 am 
Reply with quote Top  
Haha damn. that won't suit me....

Unless they fit a jimny?


TF

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Mon Dec 12, 2011 9:39 am 
Reply with quote Top  
They will but one set is 30mm and the other is only 15mm

_________________
B4T


Built by me to be driven like a rental

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours