It is currently Thu Aug 06, 2026 8:08 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 13 posts ] 
Author Message

Offline
az supporter
az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Post Posted: Tue Dec 20, 2011 7:09 am 
Reply with quote Top  
Hey all, took it for a test run today and my front isn't working the hubs are cold just wondering what it could be?? And anyone willing to help me this week sometime to get it working?

 Profile  

Offline
User avatar

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Post Posted: Tue Dec 20, 2011 7:17 am 
Reply with quote Top  
cold or not working in 4wd?



never thought i would type that.....

 Profile  

Offline
User avatar

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13008
Location: Melbourne

Post Posted: Tue Dec 20, 2011 7:40 am 
Reply with quote Top  
So much confusion....

Have another go at that post Dave. Hubs get hot regardless of being driven or not.

Steve

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Tue Dec 20, 2011 7:53 am 
Reply with quote Top  
Did u pull your diff apart to seeif your axles and cvs are broken :roll:

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
az supporter
az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Post Posted: Tue Dec 20, 2011 11:03 am 
Reply with quote Top  
Hey guys all fixed it was dry hubs sorry about my blabbering seems to be getting the better of me

 Profile  

Offline
User avatar

Joined: Thu Jan 28, 2010 10:30 pm
Posts: 245
Location: Melbourne
Vehicle: Lwb Sierra

Post Posted: Tue Dec 20, 2011 11:44 am 
Reply with quote Top  
Dodgy.. ;)

 Profile  

Offline
User avatar

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Post Posted: Tue Dec 20, 2011 8:19 pm 
Reply with quote Top  
Daves4wd wrote:
Hey guys all fixed it was dry hubs sorry about my blabbering seems to be getting the better of me

dry hubs? so when you locked them they didnt engage?
damn get some grease in there 8)

_________________
Sj70 tintop

 Profile  

Offline
az supporter
az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Post Posted: Tue Dec 20, 2011 10:28 pm 
Reply with quote Top  
All done Dazook helped me do it I'm going to ve doing a bit more testing tonight see how it goes

 Profile  

Offline
az supporter
az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Post Posted: Tue Dec 20, 2011 10:31 pm 
Reply with quote Top  
How can you tell your getting a switched one liter case?? Is the hand brake on the back of the back of the case?? Cheers off topic but not worth starting a new thread

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Post Posted: Tue Dec 20, 2011 10:39 pm 
Reply with quote Top  
a switched case has a 4x4 switch, a non switched one doesnt

 Profile  

Offline
az supporter
az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Post Posted: Wed Dec 21, 2011 1:00 am 
Reply with quote Top  
I'm guessing I answered my own question then

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Aug 19, 2009 11:30 pm
Posts: 2447
Vehicle: LJ50V, SJ70

Post Posted: Wed Dec 21, 2011 1:59 am 
Reply with quote Top  
But he didn't clarify how to tell if it's a One Litre switched case!

Put the case into low range and turn the brake drum one full rotation, and count how many times the Input flange turns while you do it. It helps if you put a Texta or chalk mark on both the drum and flange before you start.

A 1.3 case will turn the Input 2 and a quarter times, while a 1.0 case will turn it 2 and a half times. If your mark on the flange is 180deg from where you started, it's a 1.0 case, if it's 90deg then it's a NT 1.3.

 Profile  

Offline
az supporter
az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Post Posted: Wed Dec 21, 2011 2:08 am 
Reply with quote Top  
Ok awesome as thank you very much for that detailed way off telling 303zook other wise u wouldn't of guessed it

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 421 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours