[BlueSuzy]

royce wrote:

why would I, already has a nice coat of silver on it

Royce brings teh funnay

[shep]

hay ball maybe you should explain the liability issues to this strange person.
maybe royce is gunna fund his next toy by the payout he will get when the dodgy thing lets go.

from now on whenever anyone calls me dodgy i am gunna point them towards this thread.

[BlueSuzy]

shep wrote:

From now on whenever anyone calls me dodgy i am gunna point them towards this thread.

Shep brings teh funnay

Will be doing the same

[tails83]

shep wrote:

hay ball maybe you should explain the liability issues to this strange person.
maybe royce is gunna fund his next toy by the payout he will get when the dodgy thing lets go.

from now on whenever anyone calls me dodgy i am gunna point them towards this thread.

i thought about this

i have made my disclaimer - for off road use only plus i'll add in the ad "not intended for vehicle use". that covers my ass then.


this was a PM from another memeber

"Hey Tails your quickly becoming the most talked about perosn on the net.
Want to place a wager on how long this will go on for . 4 maybe 5 pages.
Some one has even fallen for your mass producing ."

I'm so glad i didn't take him up on this wager lol!!!

[shep]

tails83 wrote:

shep wrote:

hay ball maybe you should explain the liability issues to this strange person.
maybe royce is gunna fund his next toy by the payout he will get when the dodgy thing lets go.

from now on whenever anyone calls me dodgy i am gunna point them towards this thread.

i thought about this

[Saam]

i thought my ice cream containers that cover up the old strut tower holes on my car was lame lol.

[ball]

tails83 wrote:

shep wrote:

hay ball maybe you should explain the liability issues to this strange person.
maybe royce is gunna fund his next toy by the payout he will get when the dodgy thing lets go.

from now on whenever anyone calls me dodgy i am gunna point them towards this thread.

i thought about this

i have made my disclaimer - for off road use only plus i'll add in the ad "not intended for vehicle use". that covers my ass then.


this was a PM from another memeber

"Hey Tails your quickly becoming the most talked about perosn on the net.
Want to place a wager on how long this will go on for . 4 maybe 5 pages.
Some one has even fallen for your mass producing ."

I'm so glad i didn't take him up on this wager lol!!!

I'd check that with a lawyer. You might get a nasty shock.

[Zook_Fan]

what if the vehicle is being used offroad and snaps, the car hits a tree and there are victims? you think that will cover your ass?

[steve]

BWAHAHA

You all bag the shit out of this bloke, then the next hot tech topics are how to cut off suspension bits and weld them back on.

As repeated in this thread so many times... Don't come to my area with your dodgy arse RUFs.

[Fluffy]

actualy considering knocking one up myself... tails... theres no patents on it is there?

[Fluffy]

Zook_Fan wrote:

what if the vehicle is being used offroad and snaps, the car hits a tree and there are victims? you think that will cover your ass?

make sure there are no survivors....

[Bits4Vits]

Damn! I've got competition! Better watch my back!

Regards
Dave
Bits4Vits
UK

[Scrawny]

Bits4Vits wrote:

Damn! I've got competition! Better watch my back!

Yep!! Do you make dodgy arse suspension bits too?

Hey, welcome to Auszookers too Dave!! Where in the UK are you? What brings you to Aus?

[Bruce]

Bits4Vits wrote:

Damn! I've got competition! Better watch my back!

Regards
Dave
Bits4Vits
UK

hey Dave,
Loooooog time since we have caught up mate. Good to see you on an Great Aussie Forum.

[Bits4Vits]

ScrawnC wrote:

Bits4Vits wrote:

Damn! I've got competition! Better watch my back!

Yep!! Do you make dodgy arse suspension bits too?

Hey, welcome to Auszookers too Dave!! Where in the UK are you? What brings you to Aus?

No, I make the quality over-priced ones :-

tails83 wrote:

...not buying one off Bit4Vits on ebay as it's way over priced...

I'm at the top of Wales, the sticky out bit on the left of the UK!

[Bits4Vits]

ScrawnC wrote:

What brings you to Aus?

One of the guys of one of our forums linked to that quality heim spacer made from box section...

So I thought I'd come and join the fun...

Dave

[Bits4Vits]

Bruce wrote:

hey Dave,
Loooooog time since we have caught up mate. Good to see you on an Great Aussie Forum.

Nice to be here

Couldn't resist dropping in to answer my critic(s)

As mentioned above by other posters, this part is in a critical position and locates the top of the axle, if this were to fail the axle would wrap around and could cause the drive to lose control of the vehicle...

All my parts are over-engineered... this heim block is CNC cut from one solid piece of steel... the bolts are kept to a minimum length to avoid stresses, and the top bolts hold the bottom bolts in position...

What price can you put on your own life and safety, and that of your family in the vehicle...?

[royce]

your breather is too short

[ODA1]

Hi Dave

are sure you dont want to import these from him



tim
outdoorauto

[triplezuk]

Bits4Vits wrote:

As mentioned above by other posters, this part is in a critical position and locates the top of the axle, if this were to fail the axle would wrap around and could cause the drive to lose control of the vehicle...

i agree with dave on this iv seen a back axle come out due to a thin plate home made spacer and it flipped the truck on its roof. No one was harmed but it could have been so differant if it happened at speed on the highway.

[ben_uk]

my truck in the uk runs a lot of dave parts, and there all very good quality.

theres a lot of parts ive made myself such as, bumper's, diff gaurd, rock/sill sliders, snorkal, recovery points, roof cage, ect. ect.

but certain parts i would not want to risk making, such as the above part. like dave says, can you put a price on the safety of you and your family????

[Bits4Vits]

ODA1 wrote:

Hi Dave

are sure you dont want to import these from him

his vitara is up for sale on ebay!! anybody interested

tim
outdoorauto

Hi Tim!

You're getting a nice range of parts over there!

Get a picture of your heim spacer up... might sell a few more if people are reading this thread!

Dave

[tails83]

and royce is the winner!!!!
it will cost you $6.50 less the 25% = you owe me $4.90 + $10 postage

I win = you loose!!!

I EXPECT POSITIVE FEED BACK

negative feed back will be left for a non-paying bidder hehehe!!!!

p.s. all that bagging out, deep down inside you wanted it, you should have just asked me to make you one lol!!!

[royce]

where your bank details, kinda forgot to add them in there

you cant leave negative feedback, your the seller

[TZAR]

Hey bits 4 vits here is an idea. if you set the top on an angle so that the ball joint wasn't so maxed out when you made it.

this may help alleviate the stress of over extending it.

[Taff]

i didn't think sellers could leave neg feedback anymore?

edit: too slow

[Fluffy]

i swear some i looked at had an angle machined on them! just dont know where tho.

[ODA1]

ODA1 wrote:

Hi tails

sorry you could not wait a little longer, i will have stock back on my ebay page soon

Tim

hi dave, see you need to read the whole thread LOL! but thanks im just trying to live up to your shop!!

[Bruce]

So Royce, have you got this heap of shit yet?
When are you buying the part off Greg Tails? He went to all the trouble of getting his supplier to make your part that you requested. Greg paid for the part to be made and you have got bought it from him yet? Rather piss week if you ask me.

[Fluffy]

http://www.youtube.com/watch?v=_2La1THa ... =rec-HM-r2
expect this to happen! lol