| Author |
Message |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Mon Jan 23, 2012 12:00 pm |
|
Hey Guys, Im new to here aswell to the Jimny's so bare with me My name is Rick, and my partner is now a proud owner of a 04 jimny! But, can anyone help us in the direction of what we can do the the almighty little beast and if anyone can share any info so i can then understand in as much info on this as possible and what we can do to it? As far as i know so far is this - it has the 1.3L (gutless as all hell  ) and the gear ratios for the highway is very VERY short! its very stock ill put it that way with around 143,xxxkms on the clock. this will be mostly a Daily/Highway driven zook with light to moderate 4wd'ing/Beach driving but nothing over the top for all of you to know what we will be doing with it. Any help is much appreciated!
You do not have the required permissions to view the files attached to this post.
Last edited by Glanza777 on Sun Sep 16, 2012 7:25 pm, edited 1 time in total.
|
|
|
|
 |
Rockhopper
Joined: Sun Jun 22, 2008 11:30 pm Posts: 1265 Location: Chipping Norton
|
 Posted: Mon Jan 23, 2012 5:49 pm |
|
|
DOHC or single cam?? I would probably go one size up on the tyres to help with it on the freeway, but the fuel economy will suffer a little bit around town. Mine still does around 4000rpm at 110km/h, but thats where the engine develops most of it's torque at, so if you change that too much by way of gearing or tyre size, you'll find it'll bog down at the sight of any hills on the freeway. As for mods, I'd probably go an OME 40mm spring lift because it's nice and soft and will make it more comfortable around town, and maybe an airlocker for the back diff. These mods will make it quite a capable offroader. A quality bullbar will also improve the approach angle of the front of the car and some quality rocksliders will protect the sills. Don't think you will need much more than that
_________________ We're riding in the Ninky Nonk!
|
|
|
|
 |
youda
Joined: Sat Oct 15, 2011 11:44 am Posts: 204 Location: Townsville
|
 Posted: Mon Jan 23, 2012 7:04 pm |
|
|
leave it stock, get an air compressor for your tyres for beach driving. for what you want thats all you need.
_________________ oil lights are like oven alarms, let u know its co
|
|
|
|
 |
Scales

az supporter
Joined: Mon May 30, 2011 9:28 am Posts: 2233 Location: Townsville
Vehicle: 03 Jim M13A no-vvt, Vinyl Spec
|
 Posted: Mon Jan 23, 2012 11:57 pm |
|
|
+1 dont need to spend money on stuff you dont need. Maybe some A/T's next tyre change and thats it.
if you get a lazy grand or so burning a hole in your pocket, maybe put 2inch lift and leave stock rims+a/t
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Tue Jan 24, 2012 8:04 am |
|
Rockhopper wrote: DOHC or single cam?? Pretty sure it has the G13BB SOHC motor in it? Quote: I would probably go one size up on the tyres to help with it on the freeway, but the fuel economy will suffer a little bit around town. Mine still does around 4000rpm at 110km/h, but thats where the engine develops most of it's torque at, so if you change that too much by way of gearing or tyre size, you'll find it'll bog down at the sight of any hills on the freeway. i think i may already have slightly larger tyres on it already? i will investigate. as far as fuel economy, one full talk to empty is 300km which is sort of concerning... i was hoping that if there was a way to extend the gearing and 'maybe' (keyword  ) install either a super/turbo charger on it then it will help balance it out (not going anything crazy in the sense of power) but this is a conversation my partner and i were considering since it has next to no power and fuel economy is up the creek. has anyone come across a suitable engine conversion for these at all? Quote: As for mods, I'd probably go an OME 40mm spring lift because it's nice and soft and will make it more comfortable around town, and maybe an airlocker for the back diff. These mods will make it quite a capable offroader. definitely was looking at getting some suspension mods done, same with with air locker but was also looking at these Lock Right diffs you can install aswell but am not sure if they are worth it. Quote: A quality bullbar will also improve the approach angle of the front of the car and some quality rocksliders will protect the sills. Don't think you will need much more than that
the bullbar it currently has looks to be quite rigid and sturdy so i think we are covered there, rocksliders would be a +
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Tue Jan 24, 2012 8:07 am |
|
youda wrote: leave it stock, get an air compressor for your tyres for beach driving. for what you want thats all you need.
that would definitely be helpful!
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Tue Jan 24, 2012 8:08 am |
|
Scales wrote: +1 dont need to spend money on stuff you dont need. Maybe some A/T's next tyre change and thats it. Definitely agreed. We dont want to spend too much money which wont be worth it  Quote: if you get a lazy grand or so burning a hole in your pocket, maybe put 2inch lift and leave stock rims+a/t
that sounds like a plan to me 
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Tue Jan 24, 2012 8:09 am |
|
|
Any tips on recommended places for these parts within Brisbane Metro area?
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Tue Jan 24, 2012 8:11 am |
|
|
X2 on the compressor
Diff breathers
first aid kit
fire extinguisher
recovery points front and rear
A/T tyres
Join a club so you aren't going out on your own.
Then a diff lock in the rear.
Suspenion? Low priority. It's not going to allow a bigger tyre and if you are doing beach and light 4WDing spending money on suspension is a waste of money.
Steve.
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Tue Jan 24, 2012 8:16 am |
|
Gwagensteve wrote: X2 on the compressor Diff breathers first aid kit fire extinguisher recovery points front and rear A/T tyres Join a club so you aren't going out on your own.
Then a diff lock in the rear.
Suspenion? Low priority. It's not going to allow a bigger tyre and if you are doing beach and light 4WDing spending money on suspension is a waste of money.
Steve.
Thanks Steve, straight forward, i like it 
|
|
|
|
 |
BertZook

az supporter
Joined: Wed May 26, 2010 3:01 am Posts: 2979 Location: Sunshine Coast
Vehicle: Jimny, 45mm lift, 235's tyres
|
 Posted: Tue Jan 24, 2012 8:25 am |
|
Glanza777 wrote: i think i may already have slightly larger tyres on it already? i will investigate.
take a look on the ones u have.. stock tyres re 205/70/r15..... u should go for 215/75/r15 is the next size up... Ill give u 1" of clearance, plus it wont mess with ur gearing that much Glanza777 wrote: as far as fuel economy, one full talk to empty is 300km which is sort of concerning...
thats normal  ..... i get between 300-350km... newer models with the vvt engine get bit more
welcome to the blue jimny group hahaha 
_________________ "BertZook's Jimny needs mods fundraiser"
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Tue Jan 24, 2012 8:33 am |
|
BertZook wrote: take a look on the ones u have.. stock tyres re 205/70/r15..... u should go for 215/75/r15 is the next size up... Ill give u 1" of clearance, plus it wont mess with ur gearing that much
i think that actually sounds about right but, at 100km im pretty sure we sit at 95km/h... ill confirm tyre size when i see my partner next  Quote: thats normal  ..... i get between 300-350km... newer models with the vvt engine get bit more damn it... i was hoping it was just the car having something wrong with it Quote: welcome to the blue jimny group hahaha 
Cheers, much appreciated 
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Thu Jan 26, 2012 6:20 am |
|
BertZook wrote: take a look on the ones u have.. stock tyres re 205/70/r15..... u should go for 215/75/r15 is the next size up... Ill give u 1" of clearance, plus it wont mess with ur gearing that much
Hey bud, it already has 215/75/15 which is a plus
|
|
|
|
 |
zukenutter

az supporter
Joined: Sun Feb 08, 2009 10:30 pm Posts: 9045 Location: Brisneyland
Vehicle: 2006 Jimny JLX
|
 Posted: Fri Jan 27, 2012 1:52 am |
|
Glanza777 wrote: Rockhopper wrote: DOHC or single cam?? Pretty sure it has the G13BB SOHC motor in it?
If it's a 2004 it would be a M13A motor
Don't worry about the short gears on the highway, you'll get used to it. These motors thrive on revs. Around town you'll find it gutless if you shift before 5000rpm. This is still well short of redline, Zuke motors love a bit of rpm it's normal.
I agree with the keep it simple at first approach, even a locker is overkill in 90% of cases, especially for a beach rig. Some rustproofing may be a good idea.
_________________ Click WWW below for STICKERS
|
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Fri Jan 27, 2012 2:57 am |
|
|
you will get much better fuel economy traveling around town.
drove sensibly once and I was astonished
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Sun Aug 19, 2012 8:29 pm |
|
Hey guys, Been too long since i have replied, too much stuff has happened in the last 7 months and, most weren't so good  Moved house and about to move again. Had/having so many problems with my current Starlet Glanza V. Changed Jobs. And the list goes on.... Phew! Good News is, Me and my partner of 5.5years will FINALLY move into our first house together and, i now have been working for ARB Nundah for 5 months! How awesome is that!!! Now to the point, The Jimny has seen a 2" OME Suspension Lift Kit installed (already had a lift kit previously, was ratty though) and, installed a proper Redarc Dual Battery System with a Repco 270cca battery as the auxiliary (previous dual battery setup was crap). Now the Dramas, Idle drops real low straight after disengaging clutch coming to at a set of lights to it at idle, i have seen on here and many other forums. Haven't come across anyone giving a solid 'solution' so, i have tried the PCV Valve and doing a Subaru Upper Cylinder Cleaner but, to no luck.. On Australia Day, we managed to break the mounting off of the front Diff for the driver's side sway bar link The Main Battery is dying  (Swealing, indicator constantly on 'Recharge' and starting is getting sluggish) would like to find a descent battery suitable to replace, the current one has 370cca but, as most jimny's, the have the crappy small terminals.. We have gone through i first main belt as from what looks like to have snapped :S Replaced but, soon found the Tensioner Pulley is chewing the belts up and is now requiring both to be replaced, does anyone have a part number for these tensioner's? Future Plans Have decided on The M16A The Compressor Breathers First Aid Fire Extinguisher Am however, undecided on a few in particular parts. Now, i know few of would nd most likely will have strong disagreements. which is why, i ask for good, constructive critism and why you disagree  2" body lift brake line extensions Brake bias extension steering arm extension Caster correction bushes Decent Offset white Sunraisers (or equivalent) in 15"s with A/T's to suit (even 31's would be nice!) Plus, i ask if there is anything we should buy and install! anything will be taken into consideration! Has anyone been able to find a pair of front and rear Recovery Points to suit the Jimny's? Thanks guys!
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Sun Aug 19, 2012 9:30 pm |
|
|
If you plan to go 31 you don't need body lift at all. But you will need to spend a bit of money to get your Jimmy strong enough to run 31s. brake extension you only really need over 50mm. I I'm not sure you can get the right castor bushes for 40mm. IMO 40mm you don't need them. For recovery points you will have to make them your self. There's a thread on here some were.
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Sun Aug 19, 2012 9:36 pm |
|
zooky08 wrote: If you plan to go 31 you don't need body lift at all. But you will need to spend a bit of money to get your Jimmy strong enough to run 31s. brake extension you only really need over 50mm. I I'm not sure you can get the right castor bushes for 40mm. IMO 40mm you don't need them. For recovery points you will have to make them your self. There's a thread on here some were. Yeah 31's are a bit of overkill for us TBH we did try and fit a friends 31 muddys but instantly scrubbed the guard as soon as we lowered it down after fitment... so we will probably stick with those 215/75's morely just want a better foot print and better wider track but making sure that we only require the 2" sus lift not everything else... I had thought about the correction bushes because of the steering being a bit vague plus, i like positive castor 
|
|
|
|
 |
speedyblue
Joined: Tue May 15, 2012 1:14 pm Posts: 49
Vehicle: Jimny/110 Landy
|
 Posted: Mon Aug 20, 2012 8:34 am |
|
|
My wife's Jimny also eats belts and almost dies of low idle when you stop at lights. I found with the alternator belt you need to tension it right up (use a long bar and decent force) and then after a week, tighten it again. The other belt seems to be OK.
I haven't worked out the low idle thing yet, so can't help you there.
|
|
|
|
 |
Dr_Snapid
Joined: Mon Jul 26, 2010 11:57 am Posts: 649 Location: Grafton
Vehicle: 2003 Jimny Auto
|
 Posted: Mon Aug 20, 2012 7:37 pm |
|
|
Watch out you dont break the cam angle sensor when you stick the bar in to tighten the alternator
31s on a jimny? No chance without mods (mods that require more mods and so on)
I tried 235s and even though they were bald they scrubbed (this is worse for those of us with an ARB bar cos it hits the bar too) and besides the gearing sucked.
My advice is you can build a nice jimny or a tough one. The nice ones arent as tough, but the tough ones arent very nice (to your wallet, safety, driveability etc)
Build it nice then learn to drive (practising is fun, no?)
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Mon Aug 20, 2012 7:50 pm |
|
Dr_Snapid wrote: Watch out you dont break the cam angle sensor when you stick the bar in to tighten the alternator
31s on a jimny? No chance without mods (mods that require more mods and so on)
I tried 235s and even though they were bald they scrubbed (this is worse for those of us with an ARB bar cos it hits the bar too) and besides the gearing sucked.
My advice is you can build a nice jimny or a tough one. The nice ones arent as tough, but the tough ones arent very nice (to your wallet, safety, driveability etc)
Build it nice then learn to drive (practising is fun, no?) All in all, a nice Jimny  we both don't want to do crazy but more practicality which is why, we both want to know what is best for suspension/body/wheel/drivechain without sacrificing reliability. Practice, BIG Definate for both of us! im tired of my car having modding it to the point of 'no such thing as reliable' I love y car to pieces but its costing me so much to repair... which is going to be, fix whats wrong with it currently (before the 2-way LSD destroys something else) and sell... :'(
|
|
|
|
 |
Dr_Snapid
Joined: Mon Jul 26, 2010 11:57 am Posts: 649 Location: Grafton
Vehicle: 2003 Jimny Auto
|
 Posted: Tue Aug 21, 2012 11:05 am |
|
|
1) 2in lift (I have castor correction bushes, dunno how they perform without it with this lift) 2) 215/75 ATs or MTs (get as aggressive as you can stand on the road, or do what I do, run 2 sets of wheels with road tyres and play tyres) (get a KCI easywrench or similar for fast and easy wheel set changes) 3) Remove swaybar 4) Have fun 5) Repeat 4
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Tue Aug 21, 2012 12:22 pm |
|
Glanza777 wrote: would like to find a descent battery suitable to replace, the current one has 370cca but, as most jimny's, the have the crappy small terminals.. Future Plans Have decided on The M16A The Compressor Breathers First Aid Fire Extinguisher Am however, undecided on a few in particular parts. Now, i know few of would nd most likely will have strong disagreements. which is why, i ask for good, constructive critism and why you disagree  As far as a better choice of batteries: see an auto electrician and get your battery terminals replaced with lugs. Then get a battery that either has stud terminals or terminals with holes and flattened tops to accept back-to-back lugs. I upgraded the wiring in my coily after an alternator upgrade and the standard terminals were first to go!  As for compressor, first aid and fire extinguisher, all of those would be gear that you should have in your vehicle every time you wheel - just as important as a snatch strap. As for the future mods you listed, there is a Suzuki Club based in North Brisbane. I rarely wheel with them but I am a member and as such see the pics of all their awesome trips and know some of them are suited to people like yourself who can't decide what mods to do to there vehicle yet - you would be able to see differently modified vehicles all Suzuki and most SWB tackling the same obstacles and you could see what works well and not-so-well in different circumstances...
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Wed Aug 22, 2012 8:17 pm |
|
Reubs wrote: As far as a better choice of batteries: see an auto electrician and get your battery terminals replaced with lugs. Then get a battery that either has stud terminals or terminals with holes and flattened tops to accept back-to-back lugs. I upgraded the wiring in my coily after an alternator upgrade and the standard terminals were first to go! Thanks for the advice! i took it on-board and got ordered in a pair of Projecta BT-820 Neg + Pos  Since the Terminals already have entries for auxiliary lines, i wont need those lugs (which i had plans to use as i had them readily available at work) For the Battery, the boys at work help me achieve to find and order a a 390cca Century Battery to suit  I have all the gauge wiring to suit at work aswell so i am all good there too. I will most likely replace the earth from the battery-to-body with the thicker wiring i have there but, still am tossing up between replacing the positive wiring which passes down to the Alternator and Starter. Reubs wrote: As for compressor, first aid and fire extinguisher, all of those would be gear that you should have in your vehicle every time you wheel - just as important as a snatch strap. Those will definitely be on the next of things to do aswell as, i can get the ARB Compressor and Pump-up Kit as well for Staff Price  Quote: As for the future mods you listed, there is a Suzuki Club based in North Brisbane. I rarely wheel with them but I am a member and as such see the pics of all their awesome trips and know some of them are suited to people like yourself who can't decide what mods to do to there vehicle yet - you would be able to see differently modified vehicles all Suzuki and most SWB tackling the same obstacles and you could see what works well and not-so-well in different circumstances... Im signing up with there forum now, thanks for letting me know!
|
|
|
|
 |
Glanza777
Joined: Mon Jan 23, 2012 11:52 am Posts: 66
Vehicle: abc
|
 Posted: Wed Aug 22, 2012 9:37 pm |
|
Dr_Snapid wrote: 1) 2in lift (I have castor correction bushes, dunno how they perform without it with this lift) Done, will get bushes Dr_Snapid wrote: 2) 215/75 ATs or MTs (get as aggressive as you can stand on the road, or do what I do, run 2 sets of wheels with road tyres and play tyres) (get a KCI easywrench or similar for fast and easy wheel set changes) Just need to replace rears with the same on the fronts but, they all are 215/75's. i hope to get some good M/T's as a seperate set for 4wd only trips but have to wait and see... Dr_Snapid wrote: 3) Remove swaybar Only when we go 4wding, she done like it removed when on the road haha Dr_Snapid wrote: 4) Have fun Totally! Dr_Snapid wrote: 5) Repeat 4 Wont have to tell me that twice!
|
|
|
|
 |
Jason
Joined: Sun Jan 23, 2011 12:08 am Posts: 45 Location: Brisbane 4053
Vehicle: 2001 Jimny M13a
|
 Posted: Thu Aug 23, 2012 5:33 pm |
|
Glanza777 wrote: Idle drops real low straight after disengaging clutch coming to at a set of lights to it at idle, i have seen on here and many other forums. Haven't come across anyone giving a solid 'solution' so, i have tried the PCV Valve and doing a Subaru Upper Cylinder Cleaner but, to no luck.. Mine used to do this all the time. In the end I adjusted the throttle stop so that the tickover was just about 1000rpm. It still dips but not enough to start the belt squealing. Glanza777 wrote: We have gone through i first main belt as from what looks like to have snapped :S Replaced but, soon found the Tensioner Pulley is chewing the belts up and is now requiring both to be replaced, does anyone have a part number for these tensioner's? +1 Just gotta keep it tight. Probably will be knackering the bearing on the end of the water pump on mine it's that tight. And I carry a spare. Your fuel consumption does sound a bit high. I get 400+ on every tank. Are you running 95? I put 91 in a couple of times before I realised it was supposed to have 95 minimum and I got crap ecomomy from 91, and it pinked like a mofo on hot days.
|
|
|
|
 |
|