| Author |
Message |
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
 Posted: Fri Jan 27, 2012 12:02 am |
|
Hi All, Here is another of my parts on ebay, a photo and a link below: SOLD,not going anywhere without this bit  This Stockman shaft is 9mm shorter than a LJ50 one, but still fits! Regards Greg
You do not have the required permissions to view the files attached to this post.
Last edited by Boggomobile on Fri Feb 03, 2012 7:38 am, edited 7 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Tue Jan 31, 2012 7:57 pm |
|
|
Hi All,
Here is the photo and a link to ebay for my bullbar that is on there at the moment;
Sold, off on a new mission!
Regards
Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Wed Feb 08, 2012 7:41 am, edited 3 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Thu Feb 02, 2012 7:19 pm |
|
tanshi wrote: Boggomobile wrote: Hi All,
tanshi, 6 motors is a fair size collection! Am I reading this right, 6 motors and none of them have any reed valves? What happened to them all? Do you have any mounting plates for the 4 petal type as between us, we could make up a set?
Assuming that you are rebuilding motors for other people, have you had trouble getting the middle main bearings?
Regards
Greg yep six is correct. I would like to rebuild them but getting bearings is proving very very difficult. i think i only have one 4 petal type reed valve. i have 3 others which doesnt really give me enough reeds tanshi,do you happen to have the numbers or the sizes as I have a drawer full of new old stock of bearings, might have some? Greg
_________________
COOL BANANAS!
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Fri Feb 03, 2012 7:52 am |
|
Hi All, Yeah, yeah I know, another one! Photo and link to my LJ softtop tailgate on ebay at the moment; SOLD, soon to be wheeling with the LJ Boys!  Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 10, 2012 7:33 am, edited 2 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Fri Feb 03, 2012 10:27 am |
|
Hi All, Below is a photo and a link to my LJ80 door mirror on ebay at the moment; SOLd, soon to be wheeling with the LJ Boys! Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 10, 2012 7:34 am, edited 2 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Fri Feb 03, 2012 10:47 am |
|
|
Hi All,
This gets depressing as I have been dismantling and selling off parts of my LJ81 that I drove around Australia in. Certainly had some good times as I generally took the route closest to the ocean and beach hopped Fraser Island, the Coorong and multiple other beaches. Probably should mention Cape York and Gulf country, Kakadu, Litchfield Park, Margaret River and Snowy Mountain high country, there is just too many to mention!
Anyway, along with nosecone, headlight buckets, bullbar and countless other things, here is a photo and link to my LJ80/81 bonnet;
SOLD, this bonnet could tell some stories!
Regards
Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Wed Feb 08, 2012 7:50 am |
|
Hi All, This is a link and photo of my LJ wheel on ebay at the moment: SOLD, off to a new home!  Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Wed Feb 15, 2012 6:53 am, edited 3 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Wed Feb 08, 2012 10:37 am |
|
Hi All, I have now listed my Suzuki LJ80 Stockman / SJ40 1.0L Sierra Extractors F8A / F10A on ebay and below is the photo: SOLD, cool sometimes and hot when they need to be! :  Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Wed Feb 15, 2012 6:58 am, edited 4 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Thu Feb 09, 2012 2:16 pm |
|
Hi All, This is a link and photo of my LJ Stockman rear driveshaft listed on ebay: SOLD, ready to pass it on!  Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 17, 2012 7:12 am, edited 2 times in total.
|
|
|
|
|
Ben_Sierra
az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
Posted: Thu Feb 09, 2012 2:32 pm |
|
|
Hi Boggomobile, you wouldn't happen to have an LJ50 wiper motor would you?
_________________ I want my old sig back 
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Thu Feb 09, 2012 7:35 pm |
|
|
HI All,
Ben, I will need to know whether you are after a softtop or hardtop one, there is a difference. Either way you have picked something that I have a plentiful supply.
Regards
Greg
_________________
COOL BANANAS!
|
|
|
|
|
Ben_Sierra
az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
Posted: Thu Feb 09, 2012 9:05 pm |
|
|
Not for me - I'll double check and get back to you.
_________________ I want my old sig back
|
|
|
|
|
Ben_Sierra
az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
Posted: Thu Feb 09, 2012 9:08 pm |
|
|
Soft top apparently... How much?
_________________ I want my old sig back
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Fri Feb 10, 2012 6:53 am |
|
Hi All, Ben and LJ50 owner, how does $30.00 plus postage sound? The reason I like ebay is there is no need to price things, Hardtop wiper motors outnumber softtop ones 15 to 1 at my place! Below is a photo and link to my LJ81 rear number plate holder on ebay at the moment: SOLD, Happy to wave goodbye at the back! Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 17, 2012 7:14 am, edited 2 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Fri Feb 10, 2012 7:10 am |
|
Hi All, Going to change tack here and ask for help, any feedback welcome! Have tried to vary my announcement each time to avoid the drone, it needs to include ebay link, my (part) and photo. Look forward to some interesting replies!!!!!!!!!!!!!!!! On ebay is my LJ50/80 combination switch and below is a photo: SOLD, how do you like my coffee cup? Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 17, 2012 7:19 am, edited 3 times in total.
|
|
|
|
|
RustyOldLJ
Joined: Tue Jan 17, 2012 5:49 am Posts: 7 Location: Nelson Bay, NSW
|
Posted: Fri Feb 10, 2012 12:22 pm |
|
|
I wish I was closer to you!
I'd love to be able to come and pick your spare parts collection to pieces.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Mon Feb 13, 2012 7:56 pm |
|
|
Hi All,
RustyOldLJ, let us know what you are after and I will post or email photos to you, this is assuming that you have Australia Post or couriers in your area?
Regards
Greg
_________________
COOL BANANAS!
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Tue Feb 14, 2012 8:27 pm |
|
Hi All, Just letting you know that I have a LJ series Softtop handbrake complete with cable and genuine key on ebay, here is the link: SOLD, Waited a long time for a new home! And here is a photo:
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 24, 2012 11:08 am, edited 1 time in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Thu Feb 16, 2012 7:45 pm |
|
Hi All, Also on ebay at the moment is my LJ50/80 heater box assembly, below is a photo and a link: http://www.ebay.com.au/itm/Suzuki-LJ50- ... 1c23d49887Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Tue Feb 21, 2012 7:54 pm, edited 1 time in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Fri Feb 17, 2012 7:46 am |
|
Hi All, On ebay at the moment, I have a LJ50 diff centre (it will fit LJ80, Stockman and SJ40 1.0L Sierra). Below is a link and photo: SOLD, I have more of these if anyone else wants them? Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 24, 2012 11:07 am, edited 2 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Fri Feb 17, 2012 7:50 am |
|
Hi All, Also on ebay at the moment is a pair of my LJ series sunvisors: SOLD, these will keep the sun out of your eyes!  Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Fri Feb 24, 2012 11:05 am, edited 3 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Mon Feb 20, 2012 2:29 pm |
|
|
Hi All,
Have been going through my parts shed and will be listing some SJ40 1.0L Sierra parts on ebay!!!!
Greg
_________________
COOL BANANAS!
|
|
|
|
|
tanshi
az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
Posted: Tue Feb 21, 2012 3:34 pm |
|
Boggomobile wrote: tanshi wrote:
yep six is correct. I would like to rebuild them but getting bearings is proving very very difficult. i think i only have one 4 petal type reed valve. i have 3 others which doesnt really give me enough reeds
tanshi,do you happen to have the numbers or the sizes as I have a drawer full of new old stock of bearings, might have some?
Greg
part numbers for the bearings needed for crank rebuild are: No 22: 08113-60050 No 24: 09262-35001 No 33: 09262-30021 (x2) No 34: 09269-35006 No 29: 09263-23015 would be happy to buy a set if you have them
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Tue Feb 21, 2012 7:37 pm |
|
tanshi wrote: Boggomobile wrote: tanshi wrote:
yep six is correct. I would like to rebuild them but getting bearings is proving very very difficult. i think i only have one 4 petal type reed valve. i have 3 others which doesnt really give me enough reeds
tanshi,do you happen to have the numbers or the sizes as I have a drawer full of new old stock of bearings, might have some?
Greg
part numbers for the bearings needed for crank rebuild are: No 22: 08113-60050 No 24: 09262-35001 No 33: 09262-30021 (x2) No 34: 09269-35006 No 29: 09263-23015 would be happy to buy a set if you have them Tanshi, am I right in thinking No33 (x2) are the ones that are hard to get?
_________________
COOL BANANAS!
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Tue Feb 21, 2012 8:21 pm |
|
Hi all, On ebay at the moment is a set of my LJ Series 2 screw lenses, below is a photo and link: SOLD, it seems quite a few people want these and I have some more!  Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Tue Mar 06, 2012 8:42 pm, edited 2 times in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Wed Feb 22, 2012 8:19 am |
|
Hi All, Yes another one! On ebay at the moment is my LJ80 Stockman F8A sidedraught carburettor, below is a photo and link! Click on link! Attachment: IMGP5236.JPG SOLD, Makes me happy!  Regards Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Tue Mar 06, 2012 8:44 pm, edited 1 time in total.
|
|
|
|
|
tanshi
az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
Posted: Wed Feb 22, 2012 10:50 am |
|
Boggomobile wrote: tanshi wrote: Boggomobile wrote: tanshi wrote:
yep six is correct. I would like to rebuild them but getting bearings is proving very very difficult. i think i only have one 4 petal type reed valve. i have 3 others which doesnt really give me enough reeds
tanshi,do you happen to have the numbers or the sizes as I have a drawer full of new old stock of bearings, might have some?
Greg
part numbers for the bearings needed for crank rebuild are: No 22: 08113-60050 No 24: 09262-35001 No 33: 09262-30021 (x2) No 34: 09269-35006 No 29: 09263-23015 would be happy to buy a set if you have them Tanshi, am I right in thinking No33 (x2) are the ones that are hard to get? as far as i can tell there are only two of those 6 bearings that you can still get, the other 4 i havent been able to source, there are two bearings that dont have any grooves or locating pins in them, these you can get a generic part for.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Thu Feb 23, 2012 7:50 pm |
|
Hi All, Tanshi, have not had a chance to go through drawer yet, hopefully over the weekend! SOLD, going south well before winter  Have decided to start listing 1.0L Sierra parts on ebay: Attachment: IMGP5248.JPG May as well start at the front! Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Tue Mar 06, 2012 8:40 pm, edited 1 time in total.
|
|
|
|
|
Boggomobile
Joined: Tue Oct 04, 2011 8:43 pm Posts: 640 Location: Northern NSW
|
Posted: Tue Feb 28, 2012 3:44 pm |
|
|
Hi All,
Tanshi, I had a look in my drawer and couldn't find any bearings you needed.
However, my search has revealed these LJ Series side blinker lenses still in the packets.
Regards
Greg
You do not have the required permissions to view the files attached to this post.
_________________
COOL BANANAS!
Last edited by Boggomobile on Tue Feb 28, 2012 6:44 pm, edited 1 time in total.
|
|
|
|
|
gvzookdriver
az supporter
Joined: Mon Apr 13, 2009 11:30 pm Posts: 1833 Location: Brisbane
Vehicle: Sold zuk got a Bt50
|
Posted: Tue Feb 28, 2012 4:07 pm |
|
|
Since you have 1lt parts do you happen to have 2 into 3 brake block ? ?
_________________
bt50 now but still love the zooks
|
|
|
|
|
|
