It is currently Thu Aug 06, 2026 11:47 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 19 posts ] 
Author Message

Offline
User avatar

Joined: Sun Jan 08, 2012 10:01 am
Posts: 89
Location: Childers QLD
Vehicle: sierra sj70 1993

Post Posted: Thu Mar 22, 2012 3:02 pm 
Reply with quote Top  
how do i clean out the fuel tank? what should i use?

_________________
dont get mad get muddy

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Post Posted: Thu Mar 22, 2012 4:01 pm 
Reply with quote Top  
i put a handful of small lead fishing weights in mine with a little bit of fuel swished it round poured it out then rinsed with fuel and metho.

_________________
mlm

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Thu Mar 22, 2012 5:00 pm 
Reply with quote Top  
I usually use a few handfuls of 10mm blue metal gravel.
Nice and sharp so it really gets all the rust.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Thu Mar 22, 2012 5:11 pm 
Reply with quote Top  
want33s wrote:
I usually use a few handfuls of 10mm blue metal gravel.
Nice and sharp so it really gets all the rust.


x2

also works well for cleaning out grungy radiator overflow bottles as long as they're not too heat damaged & are fragile/brittle.

_________________
You're just hating because you don't understand

 Profile WWW  

Offline
az supporter
az supporter

Joined: Fri May 15, 2009 11:30 pm
Posts: 464
Location: Southside Brisbane- the best side of the river
Vehicle: Shitbox

Post Posted: Thu Mar 22, 2012 7:02 pm 
Reply with quote Top  
want33s wrote:
I usually use a few handfuls of 10mm blue metal gravel.
Nice and sharp so it really gets all the rust.


Do you shake it dry or wet? I've read about guys flushing it with water is that the right thing too do after?

_________________
Scrawn wrote:
Signatures are shit anyway

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Thu Mar 22, 2012 7:32 pm 
Reply with quote Top  
I shake it with gravel and a few litres of metho.
Rinse out with petrol.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jan 18, 2011 3:24 am
Posts: 976
Location: Perth

Post Posted: Fri Mar 23, 2012 10:53 am 
Reply with quote Top  
Do not use water.....ball bearings or blue metal is the go....leave abit of petrol in the tank when you do it and then re-rinse with petrol again

_________________
Fast,Cheap,Reliable-Pick 2 & 3rd is laughable

 Profile  

Offline
User avatar

Joined: Mon Nov 19, 2007 10:30 pm
Posts: 731
Location: Townsville
Vehicle: 88 SWB WT Sierra soft top ute

Post Posted: Fri Mar 23, 2012 12:42 pm 
Reply with quote Top  
Wouldn't blue metal possibly spark?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Fri Mar 23, 2012 7:35 pm 
Reply with quote Top  
GRPABT1 wrote:
Wouldn't blue metal possibly spark?

It is basalt not steel... :roll:

 Profile  

Offline
User avatar

Joined: Mon Nov 19, 2007 10:30 pm
Posts: 731
Location: Townsville
Vehicle: 88 SWB WT Sierra soft top ute

Post Posted: Fri Mar 23, 2012 7:55 pm 
Reply with quote Top  
I know what it is but a rock can still spark, I thought that was why lead was used as it's soft and doesn't spark.

 Profile  

Offline
User avatar

Joined: Wed Feb 29, 2012 12:47 pm
Posts: 178
Location: Essendon, Melbourne
Vehicle: 90 Vitara

Post Posted: Fri Mar 23, 2012 8:29 pm 
Reply with quote Top  
I tried all of the above. Then went to wreckers and got new tank lol gave up changing fuel filters and conking out at the lights

 Profile  

Offline
az supporter
az supporter

Joined: Fri May 15, 2009 11:30 pm
Posts: 464
Location: Southside Brisbane- the best side of the river
Vehicle: Shitbox

Post Posted: Sat Mar 24, 2012 8:46 pm 
Reply with quote Top  
Jas too restart after emptying and blowing the lines clean just sit on the start whilst pumping accelerator?

_________________
Scrawn wrote:
Signatures are shit anyway

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Sat Mar 24, 2012 10:23 pm 
Reply with quote Top  
Mattmorgo wrote:
Jas too restart after emptying and blowing the lines clean just sit on the start whilst pumping accelerator?

In a carby car you can remove the supply hose from the fuel pump and pressurise the tank to blow fuel through then reconnect and crank until the float bowl is full enough to start. Or.. just crank it.
EFI: When you turn the ignition on, the pump will run for 2 seconds or so. Turn the key on and off a couple of times and it should have fuel up and start.

 Profile  

Offline
User avatar

Joined: Sun Jan 08, 2012 10:01 am
Posts: 89
Location: Childers QLD
Vehicle: sierra sj70 1993

Post Posted: Sun Mar 25, 2012 11:50 am 
Reply with quote Top  
i did all that but it now dosnt want to idle iv takin it for a drive and everythin but wont idle

_________________
dont get mad get muddy

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Post Posted: Sun Mar 25, 2012 1:34 pm 
Reply with quote Top  
GRPABT1 wrote:
I know what it is but a rock can still spark, I thought that was why lead was used as it's soft and doesn't spark.

A few people told me they use rocks in their tanks.

I just used lead because its what i had handy and it was only a precautionary clean rather than a fix.

_________________
mlm

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Sun Mar 25, 2012 1:38 pm 
Reply with quote Top  
sj70zuki wrote:
i did all that but it now dosnt want to idle iv takin it for a drive and everythin but wont idle

You probably have a bit of crap blocking the idle jet.

 Profile  

Offline
User avatar

Joined: Sun Jan 08, 2012 10:01 am
Posts: 89
Location: Childers QLD
Vehicle: sierra sj70 1993

Post Posted: Sun Mar 25, 2012 4:55 pm 
Reply with quote Top  
how do i clean it out

_________________
dont get mad get muddy

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Sun Mar 25, 2012 5:33 pm 
Reply with quote Top  
Sometimes you can fix it by:
: removing air hat
: start engine
: rev crap out of it
: while holding the throttle open, place a rag over carby to seal it so it can't suck air
: remove the rag just before engine stalls.
: repeat.

Otherwise remove the carby and underneath the float bowl are two nuts. Remove them and you'll see the 2 jets.

 Profile  

Offline
User avatar

Joined: Sun Jan 08, 2012 10:01 am
Posts: 89
Location: Childers QLD
Vehicle: sierra sj70 1993

Post Posted: Sun Mar 25, 2012 6:16 pm 
Reply with quote Top  
engine stalls with out me doing anything any way but will give it a go and see what happends

_________________
dont get mad get muddy

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 820 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours