| Author |
Message |
masterA

az supporter
Joined: Tue Jan 18, 2011 3:24 am Posts: 976 Location: Perth
|
 Posted: Fri May 25, 2012 1:31 pm |
|
|
Need to sort out my brake lines and get them extended but need/want to know by how much?!
I've got a 2" body lift and 2" shock/spring on a Maruti with 31's
Id rather do it once properly instead of going back so was wondering how much would you add to the original (stock) length
_________________ Fast,Cheap,Reliable-Pick 2 & 3rd is laughable
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9715 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Fri May 25, 2012 4:17 pm |
|
|
100mm longer. Plenty long enough for a flexxy spua sierra.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Fri May 25, 2012 5:30 pm |
|
|
I have to do this, im at work, will not be home till the 6th, so to order them so they there, what is stock or what lenght total ?
_________________ Bad decisions make good stories.
|
|
|
|
 |
masterA

az supporter
Joined: Tue Jan 18, 2011 3:24 am Posts: 976 Location: Perth
|
 Posted: Fri May 25, 2012 5:52 pm |
|
Thanks BlueSuzy.....getting them done tomorrow 
_________________ Fast,Cheap,Reliable-Pick 2 & 3rd is laughable
|
|
|
|
 |
RAPTOR88
Joined: Sat Feb 04, 2012 11:35 pm Posts: 48
Vehicle: Sierra 1.6
|
 Posted: Tue May 29, 2012 2:21 pm |
|
|
Hey mate where dud u get them done (I'm in Perth too) n how much?? Did u use braded lines or rubber
|
|
|
|
 |
d1mitch
Joined: Fri Feb 03, 2012 1:35 pm Posts: 58
Vehicle: multiple R32's, wtd sierra
|
 Posted: Tue May 29, 2012 4:08 pm |
|
|
as above ^^ would be good to know where you got them done and how much?
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8135 Location: Sunshine Coast Qld
|
 Posted: Tue May 29, 2012 4:31 pm |
|
SuziBlu wrote: I have to do this, im at work, will not be home till the 6th, so to order them so they there, what is stock or what lenght total ? Hyundai Excel front hoses are same fittings as Sierra fronts but 100mm longer. Not sure about the length of the rear. I spose I should walk outside and have a look.
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Wed May 30, 2012 4:58 am |
|
|
Any year or all years ?
Just what i need.
_________________ Bad decisions make good stories.
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8135 Location: Sunshine Coast Qld
|
 Posted: Wed May 30, 2012 6:30 pm |
|
|
|
 |
Daves4wd

az supporter
Joined: Fri Aug 26, 2011 3:17 pm Posts: 1286 Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s
|
 Posted: Wed May 30, 2012 7:31 pm |
|
|
Try Pre 95 excel the ones after 95 have a bracket on it I'd upload a pic but no camara
|
|
|
|
 |
masterA

az supporter
Joined: Tue Jan 18, 2011 3:24 am Posts: 976 Location: Perth
|
 Posted: Wed Jun 06, 2012 2:09 pm |
|
|
Got them done through Enzed....guys name is Peter Collins and he's mobile so he can come to you (Mob: 0419 043 102) Fully braided, 110mm longer with protective outer plastic hose....tested to full ADR regulations/pressure....just under $150 for front two (usually around $180) The reason it's so expensive is fittings and the testing as it needs to be done inhouse If you don't want braided and are happy with normal rubber they're around $120 but he'll do you a deal if you mention i got mine done with him
I had to bring mine in to make sure he got the correct fittings but he knows what to use now so all he needs is length and if its braided/rubber
I know it may sound abit much but brakes are one thing i didn't want to skimp on
_________________ Fast,Cheap,Reliable-Pick 2 & 3rd is laughable
|
|
|
|
 |
RAPTOR88
Joined: Sat Feb 04, 2012 11:35 pm Posts: 48
Vehicle: Sierra 1.6
|
 Posted: Fri Jun 08, 2012 3:21 pm |
|
|
I totally agree masterA I'll give him a call thanks.
|
|
|
|
 |
RAPTOR88
Joined: Sat Feb 04, 2012 11:35 pm Posts: 48
Vehicle: Sierra 1.6
|
 Posted: Fri Jun 08, 2012 3:23 pm |
|
|
Ps what name should I be givin him haha
|
|
|
|
 |
|