It is currently Tue Aug 04, 2026 11:06 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 20 posts ] 
Author Message

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Aug 22, 2012 8:45 am 
Reply with quote Top  
Hi guys hopefully someone knows where my problem's at.

About 2 years ago i did an engine conversion on my SJ70 WT -> G16B vitara engine, and it's been sweet since.

However, driving into work in it on Monday it started losing a lot of power when the REV are under 2.6k rpm. I.e. I'll be doing 60km/h on a flat, put it into 4th gear revs drop to 2K and I'll put my foot down a bit and the engine will sound sick (like it's running on 3 cylinders or something) and it won't get much power until revs = 2.6k-2.7k and then bam, off I go, everything sounds and feels great.

So far I've checked all my leads, removed and cleaned my plugs (they're only about a month old), but that's it.
It still idlling fine at around 700rpm - 800rpm.

Any suggestions or ideas appreciated. :)


Last edited by toastysteve on Wed Aug 22, 2012 2:44 pm, edited 1 time in total.
 Profile  

Offline

Joined: Tue Aug 03, 2010 7:39 am
Posts: 26
Location: brisbane

Post Posted: Wed Aug 22, 2012 9:11 am 
Reply with quote Top  
what plugs did you put in? have you still got your old ones?

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Aug 22, 2012 10:14 am 
Reply with quote Top  
Hey mate, the new ones were Bosch super plus cheapies. Not sure on the exact model off the top of my head F###DC+ I think. 8mm gap. From memory Bosch use the same plug for the G16A as well?
I don't have the oldies either, but I did buy some bosch platinum plugs to test this morning. I'll see how they go.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Wed Aug 22, 2012 1:37 pm 
Reply with quote Top  
Timing belt skipped a tooth?

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Aug 22, 2012 1:58 pm 
Reply with quote Top  
That's something I hadn't considered... I'll check this tonight, although if it had skipped a tooth I would think that the issue would be consistent at any RPM, wouldn't it?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Wed Aug 22, 2012 2:17 pm 
Reply with quote Top  
What modale Baleno? 98+Coilpack?

Check/fiddle with TPS?

My engine has dies on a freeway a couple of times, Fiddled with the Throttle Position Sensor Worked fine every since.





I wish my zook explore more

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Wed Aug 22, 2012 2:19 pm 
Reply with quote Top  
toastysteve wrote:
That's something I hadn't considered... I'll check this tonight, although if it had skipped a tooth I would think that the issue would be consistent at any RPM, wouldn't it?



Possibly. But as the timing is advanced/ retarded it will compund any timing issues.

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Aug 22, 2012 2:47 pm 
Reply with quote Top  
BlueSuzy wrote:
What modale Baleno? 98+Coilpack?

Check/fiddle with TPS?

My engine has dies on a freeway a couple of times, Fiddled with the Throttle Position Sensor Worked fine every since.



Hey BlueSuzy, sorry mate. I must've been off somewhere else when I wrote first post. It's actually an ex Vitara engine, not Baleno (AFAIK). So yeah, no coil pack.

 Profile  

Offline

Joined: Tue Mar 13, 2012 3:49 pm
Posts: 305
Vehicle: Nl pajero Lwb, 98 jimny

Post Posted: Wed Aug 22, 2012 6:34 pm 
Reply with quote Top  
Hmm mine doing EXACTLY the same thing 1.6 vitara efi, I changed dizzy cap and rotor button as they had some corrosion but problem still there.. Not as bad at the moment but still there

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Aug 22, 2012 8:18 pm 
Reply with quote Top  
Mmm, dizzy cap was my next move. Damn. I changed the plugs tonight without any joy.
Will have to wait till the weekend to check timing.
I want to check leads too. Have you done that Dazza?

It seems to happen mostly under load. I.e. going down a hill is okay, but going up one, or hill starting and you're gonna have a bad time.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Wed Aug 22, 2012 9:04 pm 
Reply with quote Top  
toastysteve wrote:
BlueSuzy wrote:
What modale Baleno? 98+Coilpack?

Check/fiddle with TPS?

My engine has dies on a freeway a couple of times, Fiddled with the Throttle Position Sensor Worked fine every since.



Hey BlueSuzy, sorry mate. I must've been off somewhere else when I wrote first post. It's actually an ex Vitara engine, not Baleno (AFAIK). So yeah, no coil pack.


ahah no problem :)

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline

Joined: Tue Mar 13, 2012 3:49 pm
Posts: 305
Vehicle: Nl pajero Lwb, 98 jimny

Post Posted: Thu Aug 23, 2012 5:03 am 
Reply with quote Top  
Plugs/leads were to be my next step as well. Just out of curiosity do you have check engine light displayed? Mine has, and a wild stab here I am thinking o2 sensors faulty? Seems to be chewing through the fuel a little to. It's exactly same diagnosis as your car, misfiring under load and up to around 2800rpm then clears and takes off like a dog shot in the ass! My timing belt was replaced around 15,000kms ago so I am not really thinking timing issue....yet

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Thu Aug 23, 2012 8:14 am 
Reply with quote Top  
Hmm, no check engine light for me... But that could well be due to my hack wiring job...

I had another play last night. Changed out my plugs and replaced the battery (long shot), and still no good.
However I also had a fiddle with the sensors and the injector plugs... wiggled em around and removed a couple of easy access ones and cleaned them up a bit. Started her up and went for a quick run and it actually seems worse than before now. Hahaha, I guess that's progress?

 Profile  

Offline

Joined: Tue Mar 13, 2012 3:49 pm
Posts: 305
Vehicle: Nl pajero Lwb, 98 jimny

Post Posted: Thu Aug 23, 2012 12:38 pm 
Reply with quote Top  
Sux doesn't it! I refuse to put it into a shop and pay big$$$$ for something minor.......yet!!!

 Profile  

Offline
User avatar

Joined: Wed Feb 29, 2012 12:47 pm
Posts: 178
Location: Essendon, Melbourne
Vehicle: 90 Vitara

Post Posted: Thu Aug 23, 2012 12:54 pm 
Reply with quote Top  
check fuel filter. Mine got water in it ages back and when under load it would cut out something terrible, granted a G16A though

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Thu Aug 23, 2012 2:25 pm 
Reply with quote Top  
Thanks for the suggestion Jerry. I have an RDO tomorrow so I'll take a look and see how I go.
It hasn't rained here in a while, but I suppose it could be clogged up anyway.

 Profile  

Offline
User avatar

Joined: Wed Feb 29, 2012 12:47 pm
Posts: 178
Location: Essendon, Melbourne
Vehicle: 90 Vitara

Post Posted: Thu Aug 23, 2012 3:23 pm 
Reply with quote Top  
my tank was contaminated thanks to caltex's shitty tanks :(

 Profile  

Offline

Joined: Tue Mar 13, 2012 3:49 pm
Posts: 305
Vehicle: Nl pajero Lwb, 98 jimny

Post Posted: Fri Aug 24, 2012 4:47 am 
Reply with quote Top  
Hmm will be checking mine on the weekend!

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Fri Sep 07, 2012 9:47 am 
Reply with quote Top  
Hi Dazza, just wondering if you managed to solve this?
I've been over in NZ for the past 2 weeks so haven't had a chance to try anything yet.

 Profile  

Offline

Joined: Tue Mar 13, 2012 3:49 pm
Posts: 305
Vehicle: Nl pajero Lwb, 98 jimny

Post Posted: Fri Sep 07, 2012 11:37 am 
Reply with quote Top  
Yes I did bud! Changed plugs, leads, rotor button/dizzy cap, also pulled maf sensor and cleaned that after finding wrong air filter (bit short doesnt seal airbox properly). Running fine now.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 304 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours