auszookers.com • View topic - Fill Gearbox Oil, Jimny

Board index » Talking About Stuff » Suzuki Talk

Fill Gearbox Oil, Jimny

Page 1 of 1

[ 30 posts ]

Print view

Previous topic | Next topic

Author

Message

squibby

Joined: Wed May 11, 2011 3:13 am
Posts: 645
Location: Brisbane
Vehicle: On the lookout

Posted: Sat Oct 13, 2012 10:14 am

Gents,

bit of a basic question, but how do I fill the gearbox oil on the Jim?

Thanks,

Si

kristov

az supporter

Joined: Wed Oct 12, 2011 8:47 pm
Posts: 347
Location: Bunbury, WA
Vehicle: 2011 jimny

Posted: Sat Oct 13, 2012 10:19 am

filler hole on the passager side of gearbox,above the exhaust

edit http://www.supercheapauto.com.au/online ... escription one of these will make life a dream filling it, also good for diffs

Last edited by kristov on Sat Oct 13, 2012 10:36 am, edited 1 time in total.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Oct 13, 2012 10:27 am

or squirt a mouthful in at a time via the breather :gross:

_________________
You're just hating because you don't understand

squibby

Joined: Wed May 11, 2011 3:13 am
Posts: 645
Location: Brisbane
Vehicle: On the lookout

Posted: Sat Oct 13, 2012 5:07 pm

Super, thanks. How about the transfer?

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sat Oct 13, 2012 5:57 pm

Same same, fill from the highest hole till it over flows then put then put the plug back in.

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Sat Oct 13, 2012 6:34 pm

Don't drain them until you undo the filler plugs.

_________________
Click WWW below for STICKERS

jimny_timmy

az supporter

Joined: Fri May 13, 2011 1:56 am
Posts: 2326
Vehicle: Suzuki Jimny 2010

Posted: Sat Oct 13, 2012 7:04 pm

zukenutter wrote:

Don't drain them until you undo the filler plugs.

What's the idea behind this?

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sat Oct 13, 2012 7:26 pm

so you know you can get oil back in :wink:

nothing worse than draining the diff & the fill plug being stuck & having to fill the bloody thing thru the breather.

_________________
You're just hating because you don't understand

jimny_timmy

az supporter

Joined: Fri May 13, 2011 1:56 am
Posts: 2326
Vehicle: Suzuki Jimny 2010

Posted: Sat Oct 13, 2012 7:42 pm

That's something that would happen to me too lol

Total_Filth

Joined: Sun Nov 06, 2011 12:36 am
Posts: 146
Location: Melbourne, VIC
Vehicle: 02 Suzuki Jimny

Posted: Sat Oct 13, 2012 8:16 pm

I can vouch for that oil pump from Super Cheap. Near best 30bucks I ever spent.

TF

5uzuki

Joined: Tue Sep 25, 2012 12:01 pm
Posts: 26
Vehicle: Jimny 2009

Posted: Sat Oct 13, 2012 8:40 pm

Ditto on the supercheap oil pump, makes the job twice as quick with 1/10 the mess.
Hardest part about the oils the gear box filler plug, its in a bitch of a position.

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Sun Oct 14, 2012 7:49 am

5uzuki wrote:

Ditto on the supercheap oil pump, makes the job twice as quick with 1/10 the mess.
Hardest part about the oils the gear box filler plug, its in a bitch of a position.

Mine has been jammed in for about twelve months and I have to fill through the breather, hard to not overfill and causes constant pressure leaks :oops:

_________________
Click WWW below for STICKERS

Sixes350

az supporter

Joined: Tue Jan 08, 2013 2:27 am
Posts: 73
Location: Townsville, QLD
Vehicle: 2000 Jimny

Posted: Thu Aug 15, 2013 7:53 pm

Sorry for the digging but does anyone know where to get a metric square adaptor from that fits? My 3/8 drive is too loose and will strip if I force it

sideways

az supporter

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Posted: Fri Aug 16, 2013 12:07 am

eBay, repco, supercheap. Any half decent tool shop.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Aug 16, 2013 12:14 am

http://www.ebay.com.au/itm/TWO-PIECE-8M ... 1e7a070269

http://www.ebay.com.au/itm/Drain-Plug-S ... 2a1481e474

_________________
You're just hating because you don't understand

Sixes350

az supporter

Joined: Tue Jan 08, 2013 2:27 am
Posts: 73
Location: Townsville, QLD
Vehicle: 2000 Jimny

Posted: Fri Aug 16, 2013 12:03 pm

I will open my eyes a bit better and have another look. I am guessing they are 10mm?

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Aug 16, 2013 12:05 pm

10mm square, they're not as common as sideways suggests

_________________
You're just hating because you don't understand

Sixes350

az supporter

Joined: Tue Jan 08, 2013 2:27 am
Posts: 73
Location: Townsville, QLD
Vehicle: 2000 Jimny

Posted: Fri Aug 16, 2013 6:42 pm

Ended up visiting 5 shops and the last one was a specialist. Had to buy a whole kit for $99. So with that done have changed the oil in everything bar the rear diff. The nut is rounded so bad :'( will have to find someone with a welder.

Jaye

Joined: Tue Jan 01, 2013 9:16 am
Posts: 180
Vehicle: Jimny '09 Manual

Posted: Fri Aug 16, 2013 9:02 pm

Yeah they hard to find them square bits.

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Mon Aug 19, 2013 8:05 am

Sixes350 wrote:

Tips on removing a stubborn thread... Spray some WD40 around the thread. Do this multiple times over a period. If its rusted real bad, do this for days. Make sure the tool recess is clean of dirt. If the tool is a tight fit, hammer it into the recess. You can even hammer whilst trying to turn the tool. of course, if its rounded that bad, none of this will help.

Sixes350

az supporter

Joined: Tue Jan 08, 2013 2:27 am
Posts: 73
Location: Townsville, QLD
Vehicle: 2000 Jimny

Posted: Mon Aug 19, 2013 11:30 am

Bugsta wrote:

of course, if its rounded that bad, none of this will help.

Hmmm does this count?

Does the "F24" mean anything??

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Aug 19, 2013 11:40 am

that fill plug is Frucked to the power of 24

_________________
You're just hating because you don't understand

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Mon Aug 19, 2013 11:43 am

looks like my gearbox filler plug, at least this one is easy to get to

_________________
Click WWW below for STICKERS

Last edited by zukenutter on Mon Aug 19, 2013 11:51 am, edited 1 time in total.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Aug 19, 2013 11:47 am

can you get a pair of vicegrips onto it?

_________________
You're just hating because you don't understand

Asps91

Joined: Mon Apr 08, 2013 2:23 pm
Posts: 120
Location: Sydney
Vehicle: Suzuki jimny, WT sierra, GTR.

Posted: Mon Aug 19, 2013 11:54 am

Take to it with a hammer and cold chisel.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Mon Aug 19, 2013 11:55 am

Look at the plug again..

_________________
mlm

Sixes350

az supporter

Joined: Tue Jan 08, 2013 2:27 am
Posts: 73
Location: Townsville, QLD
Vehicle: 2000 Jimny

Posted: Mon Aug 19, 2013 11:58 am

Beat ya to it Atari! Just after I posted the pic I dug a little deeper in the tool box. Not sure why I didn't think of it earlier. Was still a PITA to undo. Now, where do I get new plugs?? Can head back to what previous owner has done and it is a OCD thing of mine to fix stuff as I see it.

I still cant believe that someone has done this to the plug..... well, all of the plugs

Sixes350

az supporter

Joined: Tue Jan 08, 2013 2:27 am
Posts: 73
Location: Townsville, QLD
Vehicle: 2000 Jimny

Posted: Mon Aug 19, 2013 12:25 pm

$45 for the complete set of drain / filler plugs and gaskets from Suzuki.

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Mon Aug 19, 2013 1:14 pm

A bit overpriced but it would take you a bit of work to get a set of second hand ones from a wreck. And thats if THEY are worth getting.

Anyone got a link to an ebay sale of the correct removal tool? Does Trade tools sell them?

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Aug 19, 2013 1:21 pm

Bugsta wrote:

Anyone got a link to an ebay sale of the correct removal tool? Does Trade tools sell them?

scroll up a bit more :wink:

_________________
You're just hating because you don't understand

Page 1 of 1

[ 30 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 242 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum