auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

AVM manual hubs

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

Chop

az supporter

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 6456
Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV

Posted: Wed Jun 03, 2009 7:41 pm

AVM manual hubs, good or bad?

chop

_________________
Chop

Suzuki's are like Mogwai's, they multiply!

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Jun 03, 2009 7:59 pm

bad, aren't they know for being the weakest link.... at least with the Asians you can steal bits from slowlux's etc.......

I have a pair of auto free wheeling hubs you can have, then you don't even have to get out to go 4wding? :wink:

_________________
You're just hating because you don't understand

kenn

Joined: Tue Nov 11, 2008 10:30 pm
Posts: 1202
Location: Melbourne

Posted: Wed Jun 03, 2009 9:28 pm

You want the old steel case ones, there ace :!:

Bruce

az supporter

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Posted: Wed Jun 03, 2009 10:00 pm

Leave them alone. JMO. Asians are the ONLY way to go mate

_________________
[quote="royce"] I wouldnt mind insulating my rear

Chop

az supporter

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 6456
Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV

Posted: Wed Jun 03, 2009 10:15 pm

Yeah, just thought i'd ask. mine are a bit rustic lol.
And i was watching the tassie dvd with 4wd monthly and the big V8 80 series had them on it.
And thought if they were bad they wouldnt use them on something big, heavy and powerful like that.

Chop

_________________
Chop

Suzuki's are like Mogwai's, they multiply!

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Wed Jun 03, 2009 10:53 pm

AVM's are junk.

No, you wouldn't use them on something big and heavy, they'll just break.

Aisin hubs are very strong - AFAIK there is no stronger alternative.

Steve.

Bruce

az supporter

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Posted: Wed Jun 03, 2009 11:07 pm

Gwagensteve wrote:

AVM's are junk.

No, you wouldn't use them on something big and heavy, they'll just break.

Aisin hubs are very strong - AFAIK there is no stronger alternative.

Steve.

x2 mate

_________________
[quote="royce"] I wouldnt mind insulating my rear

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Jun 03, 2009 11:08 pm

just go down to u-steal it & rape a few 4wd's. As far as I could see most of the guts are the same... the only difference I could see were the different spline counts.

_________________
You're just hating because you don't understand

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Wed Jun 03, 2009 11:57 pm

early steel avm's are the way to go and far more reliable than aisins. the early avm's are a licensed version of the warn hub. as long as aisins are kept lubricated they will be fine, but the dial is so much nicer on an early avm.

_________________
builder of custom road legal zooks......and stuff.

Chop

az supporter

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 6456
Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV

Posted: Thu Jun 04, 2009 12:42 am

Thanks guys.

Chop

_________________
Chop

Suzuki's are like Mogwai's, they multiply!

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum