auszookers.com • View topic - Baleno G16B hose/thermostat questions

Board index » Talking About Stuff » Suzuki Talk

Baleno G16B hose/thermostat questions

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Mon Nov 26, 2012 5:02 pm

Currently doing a baleno G16B and was wondering wich thermostat housing and hose combination people have used

Last edited by kenny.G345 on Mon Jan 21, 2013 9:54 pm, edited 1 time in total.

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Mon Nov 26, 2012 5:05 pm

Suzuki swift housing. There are part numbers floating around my thread.
As for the hoses, next to nothing off the shelf. You will have to mix and match. Some go over the exhaust manifold and some including myself go under the intake manifold.

_________________
Watch out or you'll get sued.

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Mon Nov 26, 2012 6:10 pm

thanks man will have a look at your thread

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Sun Jan 06, 2013 8:53 pm

ok so the motor is in but it hits the vacum connector for the booster, what have other people done to fix this??

jimbo_jones

az supporter

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Posted: Sun Jan 06, 2013 9:51 pm

you can spin it around so it points up

_________________
www.illawarrasuzuki4wdclub.webs.com

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Sun Jan 06, 2013 10:49 pm

It already pointed up and it won't go any other way because of the plate on the back of the inlet manifold, I am pretty sure I need one from an xd/xf falcon if it fits

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Sun Jan 06, 2013 11:23 pm

can you use jimny bits?

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Mon Jan 07, 2013 9:12 pm

hey cuzz i used a xf/xd one with a new grommet, fitted mint

boostedbrick

az supporter

Joined: Tue Jun 29, 2010 7:44 am
Posts: 2003
Location: Brisbane
Vehicle: 2018 DMAX

Posted: Tue Jan 08, 2013 9:19 am

My balena setup uses sierra hoses with some pipe under the intake. Hoses are trimmed to suit but makes replacment easy, instead of mixing up random hoses.

NOS Swift thermostate housing is the go, one of the new ones I purchased hit the firewall.

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Tue Jan 08, 2013 10:40 pm

Rogie, cheers mate I just got to run the hose to the heater core and to the bottom of the radiator and its done

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Thu Jan 17, 2013 9:02 pm

so can anyone tell me what they did for the hoses to the heater??

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Mon Jan 21, 2013 9:55 pm

Anyone???

kenny.G345

Joined: Mon Nov 21, 2011 9:27 am
Posts: 68
Location: Hobart, Tasmania
Vehicle: SWB sj70

Posted: Wed Jan 30, 2013 10:25 pm

Ok so I am up to the wiring and was wondering what other connectors do I need apart from all the ones for the motor??

Page 1 of 1

[ 13 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 334 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum