| Author |
Message |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5936 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Thu Jan 24, 2013 5:22 pm |
|
You're complaining? 
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Fri Jan 25, 2013 12:18 am |
|
foolsp33d wrote: where there is smoke there is um....foot long flames... Me thinks your carby is running a bit rich, and the timing is out... 
|
|
|
|
 |
Zook101
Joined: Wed Nov 07, 2012 8:28 am Posts: 118 Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top
|
 Posted: Sat Jan 26, 2013 8:13 pm |
|
Just thought I'd update, replaced the valve steam seals took 7 hrs but its not too bad of a job to do no more smoke I'm one happy camper 
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Sat Jan 26, 2013 11:58 pm |
|
Zook101 wrote: Just thought I'd update, replaced the valve steam seals took 7 hrs but its not too bad of a job to do no more smoke I'm one happy camper  
|
|
|
|
 |
cairns27
Joined: Thu Dec 23, 2010 7:42 pm Posts: 489 Location: Macleay Island
Vehicle: '95 Vitara JXI LWB G16B
|
 Posted: Tue Jan 29, 2013 4:47 am |
|
|
Took the head of my 86NT, was blowing smoke on deceleration....valve stem seals OK..the pvc valve was blocked up.
bye
|
|
|
|
 |
Zook101
Joined: Wed Nov 07, 2012 8:28 am Posts: 118 Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top
|
 Posted: Tue Jan 29, 2013 6:39 am |
|
You Can Say that Again MACDADDY!! 
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Tue Jan 29, 2013 4:54 pm |
|
cairns27 wrote: Took the head of my 86NT, was blowing smoke on deceleration....valve stem seals OK..the pvc valve was blocked up.
bye The PVC Valve often gets overlooked, and they can block up pretty easily, good that you found it, just a pita that the head is off... 
|
|
|
|
 |
Zook101
Joined: Wed Nov 07, 2012 8:28 am Posts: 118 Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top
|
 Posted: Wed Jan 30, 2013 6:14 am |
|
|
I've Got 2 PVC Valves on my zook One Is Blocked And The Other i Can Blow Through it And Suck ???
I Thought PCV Valves are only supposed to Be One Way Valve on most Earlier Cars??
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Wed Jan 30, 2013 6:25 am |
|
Zook101 wrote: I've Got 2 PVC Valves on my zook One Is Blocked And The Other i Can Blow Through it And Suck ???
I Thought PCV Valves are only supposed to Be One Way Valve on most Earlier Cars?? As far as i know, yes, they are only one way, as they are meant to regulate crankcase pressure, so if it worked both ways, it cant maintain the pressure... If it is a 2nd PCV valve, and not something else, it sounds like its frucked too...
|
|
|
|
 |
Zook101
Joined: Wed Nov 07, 2012 8:28 am Posts: 118 Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top
|
 Posted: Wed Jan 30, 2013 1:34 pm |
|
|
Yer i thought So, Ill Get some New Ones I think thanks.
|
|
|
|
 |
droverdave
Joined: Wed Dec 19, 2012 7:43 am Posts: 685
Vehicle: 85 ' Drover
|
 Posted: Wed Jan 30, 2013 2:50 pm |
|
|
Sometimes they come good with a good clean in some petrol, the oil gunks them up.
The ones i have palyed with are just a ball bearing type non return valve, not alot to them.
|
|
|
|
 |
Zook101
Joined: Wed Nov 07, 2012 8:28 am Posts: 118 Location: Gippsland, VIC
Vehicle: 1987 Suzuki Sierra hard top
|
 Posted: Thu Jan 31, 2013 6:37 am |
|
|
Thanks for your input Drover Dave I Might play around with them on my spare motor cheers.
|
|
|
|
 |
|