It is currently Sun Aug 02, 2026 5:44 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline

Joined: Tue Aug 24, 2010 12:22 pm
Posts: 500
Location: north richmond

Post Posted: Thu May 09, 2013 7:22 pm 
Reply with quote Top  
Ok I just bought a 84 sierra as a little runn around and it wasn't running he bloke said it was the fuel pump so have changes the fuel pump it has new plugs and stuff thermostat changed just about everything it was running a little befor I did it all but totally stoped so I replaced everything and it still won't run it seams like it's not sucking fuel um have pulled fuel hose off engin and cranked it to see if any fuel came out but none did so I pulled the fuel filter off (at the back of the car) and emptied the fuel out of the fuel filter and tried cranking it to see if the fuel filter would fill with fuel but it didn't what could be the problem ?

Have I put the fuel pump in wrong or is the fuel line blocked ????

Is there a surtin way to put the mechanical fuel pump in properly ?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Post Posted: Thu May 09, 2013 7:28 pm 
Reply with quote Top  
Is the pin in?

_________________
mlm

 Profile  

Offline

Joined: Tue Aug 24, 2010 12:22 pm
Posts: 500
Location: north richmond

Post Posted: Thu May 09, 2013 8:28 pm 
Reply with quote Top  
Pin ?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Thu May 09, 2013 9:07 pm 
Reply with quote Top  
Theres a small pin, that the fuel pump connects to the cam with,
its a common problem that it falls out during the install.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
User avatar

Joined: Thu Nov 11, 2010 11:53 am
Posts: 50
Location: UK

Post Posted: Thu May 09, 2013 10:25 pm 
Reply with quote Top  
christover1 wrote:
Theres a small pin, that the fuel pump connects to the cam with,
its a common problem that it falls out during the install.


The fuel pump runs directly off the camshaft on the f10 and there isn't a pin like on the G series engines.

I would pull off and replace the rubber fuel lines, they perish and start to crack when they are old. if that fails might be worth dropping the tank to see if the pick up pipe has broken as that is common when they get old and rust away.

I know its a silly question but how much fuel is in the tank? :lol:

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Post Posted: Thu May 09, 2013 11:59 pm 
Reply with quote Top  
Put 600ml of fuel in a coke bottle and Sit it near your battery, then pull the fuel feed/return off the chassis and put them in the bottle. If it runs you have a problem further down! You can also take the fuel line off at the carbi, crank her and that will tell you if the pump is alive

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

 Profile WWW  

Offline

Joined: Tue Aug 24, 2010 12:22 pm
Posts: 500
Location: north richmond

Post Posted: Fri May 10, 2013 2:16 am 
Reply with quote Top  
Ok thanks heaps everyone I will try all them tomorrow arvo

 Profile  

Offline

Joined: Tue Aug 24, 2010 12:22 pm
Posts: 500
Location: north richmond

Post Posted: Fri May 10, 2013 2:19 am 
Reply with quote Top  
There is 1/4 of a tank in it of fresh new fuel i dumped the old fuel out and tried to take the crap in the bottom with it

 Profile  

Offline
User avatar

Joined: Sat Aug 07, 2010 1:15 am
Posts: 74
Location: sunny cst

Post Posted: Fri May 10, 2013 10:11 am 
Reply with quote Top  
my 1 litre sometimes just does not run even tho i am getting fuel at the inlet of the carb, i pulled the fuel inlet off and gave it a quick jab of compressed air (but not too much!) and it seemed to work, try it out!

 Profile  

Offline

Joined: Tue Aug 24, 2010 12:22 pm
Posts: 500
Location: north richmond

Post Posted: Fri May 10, 2013 12:35 pm 
Reply with quote Top  
Ok i Will try that to thanks

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Post Posted: Fri May 10, 2013 1:54 pm 
Reply with quote Top  
Blow the lines out with compressed air, you get a fair bit of crap out of them!

As an aside, my 1ls cam wore out where it operates the fuel pump, I haven't seen it on another one but that's not to say it wont happen to other engines.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 295 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours