auszookers.com • View topic - Jimny reduction gears

Board index » Talking About Stuff » Suzuki Talk

Jimny reduction gears

Page 1 of 1

[ 17 posts ]

Print view

Previous topic | Next topic

Author

Message

MikeyS

Joined: Mon Jan 14, 2013 10:24 am
Posts: 202
Location: QLD
Vehicle: 98 Jimny

Posted: Sat Jul 06, 2013 10:48 pm

Hi i am going to buy 6.5:1 Sierra reduction gears for my jimny.

I need to buy a 1.3L sierra T/case just wondering what type of sierra t/case will best fit this http://locktup4x4.com.au/sierra-6-5-1-r ... s-391.html ???

and do i need a driveshaft spacer??

BertZook

az supporter

Joined: Wed May 26, 2010 3:01 am
Posts: 2979
Location: Sunshine Coast
Vehicle: Jimny, 45mm lift, 235's tyres

Posted: Sun Jul 07, 2013 12:20 pm

what size of tyres are you planing to run?

6.5 gears are way too low for a jimny, the % of reduction doesnt apply in the same amount for jimnys than sierras do.

have a look in here viewtopic.php?f=5&t=22383

_________________
"BertZook's Jimny needs mods fundraiser"

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun Jul 07, 2013 12:59 pm

6.5s will equal 37s for decent ish highway speed...

MikeyS

Joined: Mon Jan 14, 2013 10:24 am
Posts: 202
Location: QLD
Vehicle: 98 Jimny

Posted: Sun Jul 07, 2013 5:20 pm

I am planing on putting 31s

what about the 4.5??

suzkboy

az supporter

Joined: Mon Oct 12, 2009 10:30 pm
Posts: 270
Location: South Australia

Posted: Sun Jul 07, 2013 5:37 pm

Stock sierra gears on 31s then

MikeyS

Joined: Mon Jan 14, 2013 10:24 am
Posts: 202
Location: QLD
Vehicle: 98 Jimny

Posted: Tue Jul 09, 2013 2:18 am

what do i need to fit a sierra T/case to the jimny???

1. Shaft Spacers??

2. front and rear tail shafts??

3. does it matter if its a W/T or a N/T and what is W/T (wide track??) and N/T (narrow track???)

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Tue Jul 09, 2013 8:52 am

viewtopic.php?f=17&t=30820

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Wed Jul 10, 2013 8:28 pm

suzkboy wrote:

Stock sierra gears on 31s then

1L transfer for 31s

_________________
Click WWW below for STICKERS

Asps91

Joined: Mon Apr 08, 2013 2:23 pm
Posts: 120
Location: Sydney
Vehicle: Suzuki jimny, WT sierra, GTR.

Posted: Wed Jul 31, 2013 7:14 pm

zukenutter wrote:

suzkboy wrote:

Stock sierra gears on 31s then

1L transfer for 31s

I thought the 1l transfer didn't fit.

luke1122

Joined: Mon May 02, 2011 8:13 am
Posts: 142
Location: gold coast

Posted: Wed Jul 31, 2013 9:08 pm

whats needed to fit a 1l transfer to a jimny?

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Wed Jul 31, 2013 9:25 pm

Asps91 wrote:

zukenutter wrote:

suzkboy wrote:

Stock sierra gears on 31s then

1L transfer for 31s

I thought the 1l transfer didn't fit.

There's two types, one has a 4WD light switch and is the same housing as 1.3L transfer. Flanges need to be swapped.

_________________
Click WWW below for STICKERS

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Wed Jul 31, 2013 9:30 pm

luke1122 wrote:

whats needed to fit a 1l transfer to a jimny?

Same as fitting a 1.3 transfer
http://www.auszookers.com/forum/viewtopic.php?f=5&t=22832

_________________
Click WWW below for STICKERS

luke1122

Joined: Mon May 02, 2011 8:13 am
Posts: 142
Location: gold coast

Posted: Thu Aug 01, 2013 12:47 pm

can the non switched 1l transfer be fitted?

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Aug 01, 2013 1:02 pm

not by the sounds of this:

zukenutter wrote:

Asps91 wrote:

zukenutter wrote:

suzkboy wrote:

Stock sierra gears on 31s then

1L transfer for 31s

I thought the 1l transfer didn't fit.

There's two types, one has a 4WD light switch and is the same housing as 1.3L transfer. Flanges need to be swapped.

_________________
You're just hating because you don't understand

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Thu Aug 01, 2013 1:56 pm

I don't know, Fatzook would know for sure. If the dimensions and mount points are the same I would imagine it would but you'll never get the 4WD light in your instrument cluster to work.

_________________
Click WWW below for STICKERS

zukenutter

az supporter

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Posted: Thu Aug 01, 2013 1:58 pm

Also, the WT flanges may not fit the splines on a no switch transfer

_________________
Click WWW below for STICKERS

sideways

az supporter

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Posted: Thu Aug 01, 2013 2:12 pm

A non switched case will theoretically fit. The mounts are the same but you'l have to do something about the flanges as they can't be swapped to 1.3l ones. There's also no aftermarket gear options for them, unless you can dig up an up geared set from the early 80s.

Page 1 of 1

[ 17 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 245 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum