It is currently Sun Aug 02, 2026 1:16 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 12 posts ] 
Author Message

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Sat Aug 17, 2013 8:54 pm 
Reply with quote Top  
Hey all I have a lock rite in the front of my sierra! The last few times out it has been wet and the locker will be working great then gets to a slippery bit and starts ratcheting... And looses drive to one wheel!

I thought I may of cracked a chromo but it does it in both sides and only does it every now and then but its when ya need it it throws the towel in!

What is causing this? Broken pins? When its under load it stays in....

Cheers


Last edited by suzukikid on Sun Aug 18, 2013 7:08 am, edited 1 time in total.
 Profile  

Offline
User avatar

Joined: Tue Jan 12, 2010 10:30 pm
Posts: 2801
Location: Perth

Post Posted: Sat Aug 17, 2013 9:51 pm 
Reply with quote Top  
Mine needed re shimming when it was doing the same.

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Sun Aug 18, 2013 7:07 am 
Reply with quote Top  
And that made it all good again? Can't wait to rip it out...... Haha

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sun Aug 18, 2013 8:58 am 
Reply with quote Top  
Is this the lockright you made your own pins for?

My guess is the springs have lost their tension...... not enough force pushing the lockright apart.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Sun Aug 18, 2013 9:05 am 
Reply with quote Top  
You can buy a spring and pin reco kit for them.
I got my spare set from lowrange.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Sun Aug 18, 2013 10:08 am 
Reply with quote Top  
Nah jase not that one! Haha that was daves....

And Christopher what was that worth? Ill have to pull it apart and sus it out!

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Sun Aug 18, 2013 10:14 am 
Reply with quote Top  
http://www.lowrangeoffroad.com/index.ph ... ckers.html
$15US plus delivery of I forget but not much

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
az supporter
az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Post Posted: Sun Aug 18, 2013 11:44 am 
Reply with quote Top  
Yeah it was mine we made pins for still going strong hahaha..... If you need shims I've got a couple from the other diff we pulled apart!!! And if you order a pin kit ill jump in with ya and have a spare

 Profile  

Offline
User avatar

Joined: Tue Jan 12, 2010 10:30 pm
Posts: 2801
Location: Perth

Post Posted: Sun Aug 18, 2013 11:50 am 
Reply with quote Top  
suzukikid wrote:
And that made it all good again? Can't wait to rip it out...... Haha

This was how mine was. Re shimming fixed the front and its still going strong, it tightened up the rear locker making it less likely to slip on flat ground but it would still give out when trying to climb. I have since replaced the rear with a spool.


 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Sun Aug 18, 2013 6:17 pm 
Reply with quote Top  
Yeah looks like what mines doing! I have a spool in the rear of mine.... Yesterday when it disengaged nearly caused to me to roll end for end.... Going up a bill fine then single spinned it and flicked me around side ways half ways up a rock ledge wasn't good! Ill rip it out and sus it out

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 25, 2010 9:01 am
Posts: 1009
Location: Bendigo

Post Posted: Sun Aug 18, 2013 9:08 pm 
Reply with quote Top  
It's strange because I don't remember yours ratcheting so pronounced like Reds. She might be loose as all hell haha!

 Profile  

Offline
User avatar

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Post Posted: Mon Aug 19, 2013 5:43 am 
Reply with quote Top  
Yeah I hear it in the car... It ratchets loud as all fuck! Haha

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

Jump to:  


Who is online

Users browsing this forum: fordem, Google [Bot] and 1195 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours