| Author |
Message |
fourby

az supporter
Joined: Mon Aug 03, 2009 11:30 pm Posts: 440 Location: Brisvegas.
|
 Posted: Wed Aug 05, 2009 1:52 am |
|
|
Hey all,
well I'm new here & was wondering what are you opinions welded diffs? The sierra I just brought has one & i'm not sure if I should replace it...
Thanks in advance.
Luke.
_________________ 85 Holden Drover Soft top stocko.
[quote="losfer"
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Wed Aug 05, 2009 2:00 am |
|
|
They are great off road, and illegal on road.
They will wear your tyres more quickly and place additional strain on your axles/diff.
They are cheap, effective and reliable.
|
|
|
|
 |
fourby

az supporter
Joined: Mon Aug 03, 2009 11:30 pm Posts: 440 Location: Brisvegas.
|
 Posted: Wed Aug 05, 2009 2:01 am |
|
|
Cheers for the prompt reply mate.
_________________ 85 Holden Drover Soft top stocko.
[quote="losfer"
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Wed Aug 05, 2009 2:42 am |
|
|
If a welded diff lets go it can/will destroy the whole centre.
If a (mini)spool is fitted the worst that can happen is you snap an axle or possibly strip a crownwheel or pinion.
IMHO mini spool is a much better option than welding and has the benefit of being reversible if you decide to change to an auto or air locker or even go back to standard.
Jas.
|
|
|
|
 |
appsie
Joined: Sun Apr 20, 2008 11:30 pm Posts: 2225
|
 Posted: Wed Aug 05, 2009 2:58 am |
|
|
i run a welded rear,its as said great in the bush but crap on road and i dont like to drive it on road with it.It is cheap tho and suited the 4b side of things.
I have broken a couple of them and it has destroyed other gears in the diff centre so as said by jas the mini spool would be the better choice here for all his reasons.I am trying to chase up a spare carrier so i can go the spool route.
matt
|
|
|
|
 |
tOngEh
Joined: Sun May 10, 2009 11:30 pm Posts: 66 Location: Singapore
|
 Posted: Wed Aug 05, 2009 4:15 am |
|
|
What does a mini spool do?
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Wed Aug 05, 2009 4:18 am |
|
|
locks both axles together without the need for welding.
|
|
|
|
 |
tOngEh
Joined: Sun May 10, 2009 11:30 pm Posts: 66 Location: Singapore
|
 Posted: Wed Aug 05, 2009 4:35 am |
|
|
Oh.... which means, its a full locker?
|
|
|
|
 |
twitchy
Joined: Fri Jul 25, 2008 11:30 pm Posts: 1086 Location: Lightning Ridge
Vehicle: 1999 Jimny
|
 Posted: Wed Aug 05, 2009 10:33 am |
|
|
Welded diffs............ Maybe just best I say no comment.
not a locker as such but full time locked.
|
|
|
|
 |
NT_TOM
Joined: Tue Jul 28, 2009 11:30 pm Posts: 75 Location: Palmerston NT
|
 Posted: Wed Aug 05, 2009 2:03 pm |
|
This is what happens when a weldie brakes

|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Wed Aug 05, 2009 10:03 pm |
|
|
That's a front though. It's not going to be easy to weld one of them strong enough to be sure it wasn't going to break, and in any case, welded front diffs are a a fair PITA to drive with offroad in my experience.
I've welded quite a few rears and they're pretty reliable - it was the first thing I did to my old 1.0 rear diff.
I now run a mini spool rear and that's all I could ever see going in the back of mine, however, I don't DD, mines a LWB, and runs narrow tyres.
Steve.
|
|
|
|
 |
money_killer
Joined: Tue Jun 23, 2009 11:30 pm Posts: 301 Location: Sunshine Coast - Brisbane
Vehicle: 90 WT ST Locker, Tyres
|
 Posted: Thu Aug 06, 2009 12:45 am |
|
|
its the best budget mod u could ever do
|
|
|
|
 |
zukenutter

az supporter
Joined: Sun Feb 08, 2009 10:30 pm Posts: 9045 Location: Brisneyland
Vehicle: 2006 Jimny JLX
|
 Posted: Thu Aug 06, 2009 1:49 am |
|
|
I've never had a welded diff so I can't speak from experience. That said I think in the long term it would be a reverse economy. You'd wear your tyres in half the time and at $150 or more per tyre $400 for a auto locker seems quite cheap. Also there's the cost of replacement axles etc and the time spent under the vehicle.
If however you have an old beater that you don't spend much time, if any, on road with it would probably suit you perfectly.
_________________ Click WWW below for STICKERS
|
|
|
|
 |
fourby

az supporter
Joined: Mon Aug 03, 2009 11:30 pm Posts: 440 Location: Brisvegas.
|
 Posted: Fri Aug 07, 2009 3:07 am |
|
|
Cheers all, For my First post I'm very happy with the response..
Cheers to a good forum!
Luke.
_________________ 85 Holden Drover Soft top stocko.
[quote="losfer"
|
|
|
|
 |
grimreaper
Joined: Sat Aug 16, 2008 11:30 pm Posts: 121 Location: port macquarie nsw
|
 Posted: Fri Aug 07, 2009 1:25 pm |
|
|
the guys runign an mini spool what was the cost for one of them
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Fri Aug 07, 2009 1:49 pm |
|
grimreaper wrote: the guys runign an mini spool what was the cost for one of them
My mini spool cost US$97
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Fri Aug 07, 2009 2:46 pm |
|
zukenutter wrote: I've never had a welded diff so I can't speak from experience. That said I think in the long term it would be a reverse economy. You'd wear your tyres in half the time and at $150 or more per tyre $400 for a auto locker seems quite cheap. Also there's the cost of replacement axles etc and the time spent under the vehicle.
If however you have an old beater that you don't spend much time, if any, on road with it would probably suit you perfectly.
That's a pretty big assumption zuknutter. I'm not sure that a welded diff 1/2's tyre life, and I'm not sure an auto locker has exactly the same wear rate on tyres as an open diff.
You're also assuming that a welded diff will break axles and an auto locker won't, and there's "more time spent under the vehicle" as a result. Tell that to the guys who have had auto lockers in and out numerous times trying to get them set up right.
It's clear that you're not a fan of welded diffs, and that's fine, but your assumptions aren't necessarily the case.
Steve.
PS mini spools are now USD $109 Each + shipping.
|
|
|
|
 |
kenn
Joined: Tue Nov 11, 2008 10:30 pm Posts: 1202 Location: Melbourne
|
 Posted: Fri Aug 07, 2009 8:34 pm |
|
ARB Air Lockers rock.. 
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Fri Aug 07, 2009 8:46 pm |
|
|
welded diffs i hate. auto lockers i hate (i've had both). both require the driver to be half decent in tricky on road situations. the 'its just my off road toy' just doesn't cut it, as vehicles have to be on road some part of the time. both will lead to excessive axle wear, tyre wear, driveline wear etc.
and encouraging people to use spools or a welded diff is poor pr.
_________________ builder of custom road legal zooks......and stuff.
Last edited by joeblow on Fri Aug 07, 2009 8:48 pm, edited 1 time in total.
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Fri Aug 07, 2009 8:47 pm |
|
bah, a welded diff is just a air locker, with no switch 
|
|
|
|
 |
|