It is currently Sat Aug 01, 2026 8:07 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 15 posts ] 
Author Message

Offline

Joined: Sat Jun 23, 2012 7:39 pm
Posts: 97
Vehicle: suzuki sierra

Post Posted: Sat Nov 09, 2013 1:36 pm 
Reply with quote Top  
is there any bigger radiator fan for a swb 1.3ltre holden drover? the one thats on it now seems to small.
cheers

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Post Posted: Sat Nov 09, 2013 3:12 pm 
Reply with quote Top  
Electric one

 Profile  

Offline
User avatar

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Post Posted: Sat Nov 09, 2013 3:52 pm 
Reply with quote Top  
Bolt in a vitara viscous fan. No modifications are required. It's much bigger than a 1.3 fan, and it's 500% more reliable than an electric fan.

Steve.

 Profile  

Offline
az supporter
az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Post Posted: Sat Nov 09, 2013 3:59 pm 
Reply with quote Top  
logan wrote:
the one thats on it now seems to small.


What gives you that impression?

_________________
Watch out or you'll get sued.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Post Posted: Sat Nov 09, 2013 4:02 pm 
Reply with quote Top  
What Steve said X1000.

Here's a guide on how to refill the oil on one. Might as well do it before you fit it.

viewtopic.php?f=17&t=28644

What makes you think the current fan is to small, is it overheating? Edit, beaten.

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Post Posted: Sat Nov 09, 2013 4:56 pm 
Reply with quote Top  
Gwagensteve wrote:
.....and it's 500% more reliable than an electric fan.


Never said the electric ones were any good. He gave us a vague question so I gave him a vague answer

 Profile  

Offline

Joined: Sat Jun 23, 2012 7:39 pm
Posts: 97
Vehicle: suzuki sierra

Post Posted: Sat Nov 09, 2013 5:56 pm 
Reply with quote Top  
thanks fellas. and yeah it sits just below the "h" line

 Profile  

Offline

Joined: Sat Jun 23, 2012 7:39 pm
Posts: 97
Vehicle: suzuki sierra

Post Posted: Sat Nov 09, 2013 6:05 pm 
Reply with quote Top  
is this the one you were talking about steve?

http://www.ebay.com.au/itm/Suzuki-Vitar ... ad4&_uhb=1

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5936
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Post Posted: Sat Nov 09, 2013 6:36 pm 
Reply with quote Top  
Yes, but you need the viscous hub that goes in the middle too.

 Profile  

Offline
User avatar

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Post Posted: Sat Nov 09, 2013 6:40 pm 
Reply with quote Top  
Here are some comparison photos.

Image

From left, a 1.0 fan, a vitara fan and a 660cc sierra fan, which is basically the same as a 1.3 fan.

Image

And a 660cc/1.3 fan laid over the vitara fan.

Image

And the vitara fan in the car. It's a really tight fit inside the 1.3 shroud, which is awesome for the efficiency of the fan. This was my car running a 660, but it doesn't matter. Fan location and radiator is the same. I swapped from this to a magna thermo which was the same size due to water pump problems and my car overheated. Electric fans bring the suck.

Get one from a wrecker. I think you can get knockoffs from Ebay, but as they are non genuine, who knows?

I don't know anybody that has fitted one of these that has subsequently had ANY problem with overheating.

It's what I would run if I still had the radiator in the front of my car.

Steve.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Sat Nov 09, 2013 7:45 pm 
Reply with quote Top  
Id be looking at some thing else thats giving you the overheating issues. Stock fan should work fine.

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
User avatar

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Post Posted: Sat Nov 09, 2013 8:22 pm 
Reply with quote Top  
I disagree. I recall a club member with a stock sierra that was fresh off the showroom floor overheating in 1996. They don't overheat with a vitara fan.

Steve

 Profile  

Offline

Joined: Wed Oct 16, 2013 1:09 pm
Posts: 45
Vehicle: 1985 SJ51T

Post Posted: Sun Nov 10, 2013 2:53 pm 
Reply with quote Top  
Make sure the stock fan is bolted on the right way. I made that mistake lol

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Post Posted: Tue Nov 12, 2013 5:26 am 
Reply with quote Top  
I have a Vit Viscous engine fan and a 10" thermo on the front that i turn on when crawling.

_________________
mlm

 Profile  

Offline
az supporter
az supporter

Joined: Fri Mar 30, 2007 11:30 pm
Posts: 977

Post Posted: Wed Nov 13, 2013 6:50 pm 
Reply with quote Top  
Gwagensteve wrote:
Bolt in a vitara viscous fan. No modifications are required. It's much bigger than a 1.3 fan, and it's 500% more reliable than an electric fan.

Steve.


might be 500% more reliable than a electric fan , but its still less reliable than a direct drive fan that they come with stock.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours