| Author |
Message |
suzukilwb
Joined: Sun Jul 19, 2009 11:30 pm Posts: 358 Location: milang
|
 Posted: Mon Aug 17, 2009 12:59 am |
|
|
i put a 1.3L motor into my 1l lwb zook and i got 1.3l diff sitting there i still got 1l tcase and diff in it so what i wont to no what would be better the 1l or 1.3l diff i can sit on 90k but i trying to get 100k every one conplanes that i am slow and the motor seams to be working to much i think the 1.3l diff would be better but would 5th gear be unusable any thoughts are welcome
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Mon Aug 17, 2009 1:12 am |
|
|
|
 |
suzukilwb
Joined: Sun Jul 19, 2009 11:30 pm Posts: 358 Location: milang
|
 Posted: Mon Aug 17, 2009 1:20 am |
|
|
i was just going to take everything and swop not just the diff it if that makes sents
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Mon Aug 17, 2009 1:43 am |
|
|
is it a NT or WT 1.3? no matter which one it is the 1.3L diffs will give you better gearing for on road but they will dehance offroad gearing
|
|
|
|
 |
TZAR

az supporter
Joined: Tue Aug 01, 2006 11:30 pm Posts: 3459 Location: licking some windows
Vehicle: LJ20 LJ50
|
 Posted: Mon Aug 17, 2009 2:08 am |
|
|
1 litre and NT diffs are the same width and same mounts. WT diffs are different mounts and widths.
So yes they are a bolt in job. can be done very easily.
_________________ Camels have nice toes
|
|
|
|
 |
suzukilwb
Joined: Sun Jul 19, 2009 11:30 pm Posts: 358 Location: milang
|
 Posted: Mon Aug 17, 2009 2:27 am |
|
|
i no it would be easy i was thing more in the way of gearing
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Mon Aug 17, 2009 2:30 pm |
|
|
What size tyres do you run on it?
1 litre diffs are 4.1:1, the NT diffs are 3.9:1. If your tyres aren't too big (eg approx. 30") your 1.3 should have the torque to push it along at 100kph. I would think that with a 1 litre transfer case a 1.3 should be able to push 31s at 100kph if the motor is in decent condition.
Is the problem that you cant do more than 90kph currently? If that's the case I think your engine might be sick.
_________________ SJ50.4.LYF
|
|
|
|
 |
suzukilwb
Joined: Sun Jul 19, 2009 11:30 pm Posts: 358 Location: milang
|
 Posted: Mon Aug 17, 2009 4:16 pm |
|
|
i running 30x9.5R15 cooper stt i can do 100kph but i think its called (over run) or something likt that that motor it in good now the gear box is missing 2 teeth but it get me around i got to fix that soon but i dont think thats the problem
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Mon Aug 17, 2009 4:59 pm |
|
|
is it just me or is that hard to read....
_________________ You're just hating because you don't understand
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Mon Aug 17, 2009 5:07 pm |
|
suzukilwb wrote: ...but i dont think thats the problem
OK, so can you explain a little better what the actual problem is?
If you could structure your answer in proper sentences so I can understand WTF you're actually saying that would be great too.
_________________ SJ50.4.LYF
|
|
|
|
 |
suzukilwb
Joined: Sun Jul 19, 2009 11:30 pm Posts: 358 Location: milang
|
 Posted: Mon Aug 17, 2009 5:17 pm |
|
|
ok i will try the motor over runs trying to do 100kph so i trying to work out what would be better the 1 litre diffs at 4.1:1, or the 1.3L NT diffs at 3.9:1 what would be better on off road
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Mon Aug 17, 2009 5:30 pm |
|
|
by over runs do you mean over revs?
if its over revving you need to get higher gears, the 3.9s are higher than the 4.1s.
the 3.9s should still be low enough for off road use with 30s
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Mon Aug 17, 2009 5:33 pm |
|
|
when you say you motor "over runs" trying to do 90-100kph
do you mean reving hard?
eg 6000 RPM at 100kph, it's a suzuki they're built to rev!
_________________ You're just hating because you don't understand
|
|
|
|
 |
suzukilwb
Joined: Sun Jul 19, 2009 11:30 pm Posts: 358 Location: milang
|
 Posted: Mon Aug 17, 2009 5:44 pm |
|
|
over run thats what chris he a mechanic and say it doing it sit on about 3300rpm90kph 3500rpm doing 100kph but the motor sound like its struggling on flat road if that makes sense
Last edited by suzukilwb on Mon Aug 17, 2009 5:55 pm, edited 1 time in total.
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Mon Aug 17, 2009 5:51 pm |
|
|
its not revving overly high in fifth for 100km/h the 4.1 would raise your revs a little but make your highway speed easier on the engine. the 1 litre diffs however are a fair bit weaker when you get them off road i believe.
|
|
|
|
 |
suzukilwb
Joined: Sun Jul 19, 2009 11:30 pm Posts: 358 Location: milang
|
 Posted: Mon Aug 17, 2009 11:19 pm |
|
|
i think i might put it 1.3L diff in and see what it like
|
|
|
|
 |
|