[jamesandlara]

Which is the best transfer case for crawling? I have a 1l and a 1.3l. I notice that a lot of sierras are advertised with a 1l case.

[shep]

a 1ltr case is 12% lower then a 1.3 case.

[31zook]

yeah i thought that 1L were 5%

[shep]

31zook wrote:

yeah i thought that 1L were 5%

nope. there is 5% diferance between 1.3 wt and nt diff ratio's

[31zook]

oh very noice... ill add that to my collection of stuff i know... cheers

[hardknocks]

I would love to add one of those transfer cases to my collection
Forget the 5% ? Just get reduction gears !
Question ? Do you have to get a 1 litre transfer machined , like the
1.3 ? To fit in reduction gears . If not I'll take the 1 litre
But seriously if yourve got the cash gears!!!!

[foolsp33d]

ok 1 litre xfer is the alternative(cheap) way of goin about gears rather than spending big on aftermarket gears.There are two types of cases.. one with a switch and one without... Aftermarket gears WILL NOT fit into a 1litre xfer if it does not have a shift switch..only a 1.3(and not a coily case) even still machining MAY neede to be done...

The swap(1.3-1litre) is pretty stragiht forward, just a matter of possibly changing a mounting arm and swapping over the flanges/uni to what works. (There is a slight difference between the WT and the NT uni hence the need to swap.)

(im open to correction if there is anyone who disagree's or knows otherwise, personally if I was contemplating this, id go diff gears over xfer)
correction done ta shep

[shep]

trans gears will fit in a 1ltr case as long as it has the 4x4 switch.

[suzukilwb]

what do you mean by switch

[shep]

if it has wires hanging out of the box it is the right one.

[suzukilwb]

i got them they go to my light