auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

DIY uni joint?

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Sun Jun 29, 2014 11:08 am

Hey all is there a DIY uni joint thread? Searched but nothing shows up.....

Gotta do a couple

Blkfxx

az supporter

Joined: Sat Feb 04, 2012 7:11 pm
Posts: 1105
Location: Oberon, NSW
Vehicle: Drover pickup turk

Posted: Sun Jun 29, 2014 11:46 am

Couldn't find one on here, but...

http://www.billjohn.com/articles/drivet ... ujoint.htm

_________________

Quote:

I like the tuna here

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sun Jun 29, 2014 12:02 pm

it's pretty straight forward, i use this technique

make sure you mark driveshaft so it goes back together the same way. mark the slip joint & either end of the driveshaft & the flanges/yokes.

this is the other way, but be careful not to butcher the shaft with the grinder http://www.auszookers.com/forum/viewtop ... it=uni%27s

_________________
You're just hating because you don't understand

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Sun Jun 29, 2014 1:17 pm

Righto thanks for that! Ill give the one in the video a go!

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun Jun 29, 2014 2:10 pm

^if you click on the AZ link it tells you that 2 or more sierra owners wrecked their shafts doing it the way in the video

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Sun Jun 29, 2014 2:28 pm

i guess sierra's being a good few years old & most having done real offroad work unlike most vits they're probably well & truly seized.

i found that once in the vice with a little bit of load on them a decent knock on the ears usually is enough to shock the cap free... don't keep winding if it feels like it's binding up.

_________________
You're just hating because you don't understand

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Sun Jun 29, 2014 4:03 pm

I gave it a crack in my vice but no good.... I didn't wanna wack it too hard.... My mate has a press I will use....

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Sun Jun 29, 2014 5:01 pm

I did a how to thread a few years ago. Piss easy technique, just need a solid bench and a good copper hammer.

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Mon Jun 30, 2014 7:01 am

Have you got a link to it?

Cheers

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Jun 30, 2014 9:41 am

Bench
http://www.gumtree.com.au/s-ad/acacia-r ... 1049623033

Hammer
http://www.blackwoods.com.au/search/ham ... ?c=Product

Here you go buddy :thefinger:

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Mon Jun 30, 2014 1:06 pm

_________________
mlm

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Jun 30, 2014 1:23 pm

viewtopic.php?f=5&t=24729&hilit=uni

_________________
You're just hating because you don't understand

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Mon Jun 30, 2014 9:23 pm

31zook wrote:

Bench
http://www.gumtree.com.au/s-ad/acacia-r ... 1049623033

Hammer
http://www.blackwoods.com.au/search/ham ... ?c=Product

Here you go buddy :thefinger:

Hahahaha I had a good laugh! I really needed a bigger vice... Got the bench and being a chippy I got plenty of hammers! Haha cheers anyway bloke!

Page 1 of 1

[ 13 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 314 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum