[Fozzy]

Hi I'm Fozzy from around Cockburn area. So after many years of awwing and ahhing about getting a zook I finally got one.



I've been looking through good tech stuff and thought I'd do an oil change. It all went good but heard a squealing noise and a lot of vibration coming from the distributor assembly after I replaced oil and oil filter. Went through the service manual and opened it up.




Is that normal wear and if not what parts should I replace?

I put the assembly back in as per service manual but when tightening the bolt it cracked, is this an easy fix or should i just replace the whole thing?


Sorry for the long first post, I've been reading through a lot of the threads and making a new thread was the last thing I wanted to do as I know it is a pain in the arse if another thread has already solved the issues.

Look forward to your replies

F.

[HarryHoudini]

Welcome Fozzy,i can't help,our Coily has done 200,000 so your Dizzy looks OK.

[Fozzy]

Could anyone shed some light on how to fix the mount where the bolt goes into? It's come off completely. I haven't driven it since but did use vice grips on it just to make sure it did run.

F.

[alien]

Change your subject on the thread to something more descriptive and you might attract the right person to have a read =) Just edit the original post.

[fordem]

What sort of light do you need shed - it's broken - it needs to be replaced.

It's bolted to the back of the head, unbolt it, remove, fit replacement (new O rings would be a good idea whilst you have it out) - if you can't find a replacement, it might be possible to have it built up by welding, refacing and then drill & tap a hole - but, I suspect that will be a fairly expensive approach.

[sideways]

Yep ^

I'm sure plenty of people on here will have spares, if not you can buy them new from lror.

http://www.lowrangeoffroad.com/suzuki/s ... using.html

I might have a spare one off an F10a. I'll have a look.

[Rhinoman]

I would check that the bolt is the correct length, it may have bottomed out.

[Fozzy]

Thanks for your replies, now that I know what I'm looking for I can go forward.

@Rhinoman the bolt is the original I'm assuming plus the cracked part of the flange came off completely.

@sideways that would be awesome if you have a spare. Is the part compatible with the 1.3L G13BA engine?

The engine oil level is right on full, will there be overflow of oil when removing the housing?

F.

[Fozzy]

Replaced the housing and o ring now doesn't make any squealing noises. Winning!