It is currently Mon Jul 27, 2026 9:02 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 10 posts ] 
Author Message

Offline

Joined: Fri Jan 01, 2016 7:06 pm
Posts: 14
Vehicle: Suzuki Sierra

Post Posted: Sun Apr 17, 2016 10:30 am 
Reply with quote Top  
just made up a bit of steel plate for the center of the dash for some switches and stuff, but ive still got a fair bit of room left so what gauges are the go in sierras?

 Profile  

Offline
User avatar

Joined: Tue Aug 18, 2015 6:50 pm
Posts: 613
Location: Ipswich
Vehicle: 98 Jimny

Post Posted: Sun Apr 17, 2016 10:31 am 
Reply with quote Top  
Would help if you mentioned what you had already, but water temp and a clock are the only things I can think of that would be helpful to me.

I suppose if you had dual batteries possibly a dual V gauge.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Sep 06, 2009 11:30 pm
Posts: 2591
Location: Ipswich
Vehicle: LJ80V-II, SJ40, SJ40T, RS415

Post Posted: Sun Apr 17, 2016 6:02 pm 
Reply with quote Top  
It all depends on your level of paranoia. I've built quick street cars and i had 8 gauges plus the power fc controller displaying an extra 4 outputs. It was good to monitor what was going on. But on a Zook its a bit pointless as far as I'm concerned.

So back to the original post.. what do YOU want to keep an eye on?

_________________
31zook wrote:
Makes me want something similar

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Sun Apr 17, 2016 6:33 pm 
Reply with quote Top  
Stock have always been fine for me, i dont even have a tacho haha

 Profile  

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Sun Apr 17, 2016 6:34 pm 
Reply with quote Top  
Sierras don't need gauges, can smell when they are hot, they get rattly when out of oil and they don't go when out of fuel.

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

 Profile  

Offline
User avatar

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Post Posted: Sun Apr 17, 2016 8:31 pm 
Reply with quote Top  
^ This.

Why do you need two water temp gauges? The car already has one. An oil pressure gauge is just an engine wear gauge for a car with a standard motor..... And so it goes on.

I have stock (Vitara) gauges for everything other than auto trans temp, which is, in my application (unlike, say, a jimny) actually unnecessary. I didn't know that though before I fitted the gauge.

Steve.

 Profile  

Offline
User avatar

Joined: Tue Aug 18, 2015 6:50 pm
Posts: 613
Location: Ipswich
Vehicle: 98 Jimny

Post Posted: Mon Apr 18, 2016 6:02 am 
Reply with quote Top  
Gwagensteve wrote:

Why do you need two water temp gauges? The car already has one.


Well in my case it was because the connections on the back of the cluster were fried and it was a lot easier to get an aftermarket gauge then to try and fix the cluster/source a different one.

Honestly there is really nothing to monitor.

 Profile  

Offline
User avatar

Joined: Fri Jul 01, 2011 12:34 am
Posts: 359
Location: Northern NSW Australia.
Vehicle: Coily.

Post Posted: Mon Apr 18, 2016 8:44 am 
Reply with quote Top  
Stating the obvious but a Voltmeter is very handy esp. in the bush,keeps track of Alternator & Battery at a glance.

 Profile  

Offline
User avatar

Joined: Wed Jan 20, 2016 3:51 pm
Posts: 185
Vehicle: 86 GTI powered drover,96 coily

Post Posted: Mon Apr 18, 2016 3:00 pm 
Reply with quote Top  
volt meter id agree with but i have a cig lighter/usb charger dongle that has a voltage readout on it. works just fine for me

only other gauge id run is an oil temp guage. if you have a sudden complete loss of coolant your dash gauge usually wont show anything more than a slight bump before returning to normal, meanwhile your oil temp is skyrocketing and your engine is suffering untold damage. ive found that out the hard way before...

 Profile  

Offline
User avatar

Joined: Fri Jul 01, 2011 12:34 am
Posts: 359
Location: Northern NSW Australia.
Vehicle: Coily.

Post Posted: Mon Apr 18, 2016 9:16 pm 
Reply with quote Top  
Dan` wrote:
only other gauge id run is an oil temp guage. .


Yeah,we had one on our 1970's Datsun Rally car,the sender unit for the Oil pressure & Temp. screwed into the block where the standard oil sender switch fitted.IIRC the Temp. side of things was misleading but the pressure gauge worked well,little red light come on when it dropped below 20 psi.
I tried to find one for sale in another Thread on here but had no luck but someone would sell them,i think they were German,VDO?.
Not much point fitting a Oil temp. sender to the sump of a 4WD,too much chance of damage from a rock or branch.
I use the Cigarette dongle for Volts as well but if your putting in a cluster for Gauges you may as well add a decent Voltmeter.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google Adsense [Bot] and 407 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours