auszookers.com • View topic - Joe Blow

Board index » Shift It And Find It » Getting rid of stuff

Joe Blow - floater kit and axles

Page 1 of 1

[ 16 posts ]

Print view

Previous topic | Next topic

Author

Message

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Sun Mar 26, 2017 8:50 am

Joe Blow Floater kit and axles to suit

Located Northside Brisbane

Will post at buyers cost

Price: $200 neg

Came on a diff I bought, never driven. I'm going a different direction

What you see is what you get, all flanges to mount to your diff, seals and axles.
You need to supply vitara hubs and all brake components
Seals are in good condition, have been pressed out not levered

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Sun Mar 26, 2017 2:29 pm

Sold

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

Dmfelix

Joined: Tue Jul 02, 2013 10:02 pm
Posts: 139
Vehicle: Suzuki sierra 1988

Posted: Mon Mar 27, 2017 2:19 pm

Who ever purchased this please be aware these axles are made of cheese, mine broke clean off at the circlip.

I'd upgrade to some ADD Engineering Axles or atleast get some as spares

jono165

az supporter

Joined: Thu May 27, 2010 12:01 pm
Posts: 834
Location: Melbourne

Posted: Mon Mar 27, 2017 2:27 pm

Dmfelix wrote:

Who ever purchased this please be aware these axles are made of cheese, mine broke clean off simultaneously at the circlip.

I'd upgrade to some ADD Engineering Axles or atleast get some as spares

Those ones do look to be slightly better machined and less egg shaped than yours though

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Mon Mar 27, 2017 3:26 pm

I was going to ask whether the root of the circle groove was smaller than the OD of the smallest diameter of the axle shaft, but as Jon pointed out, they do look a little better machined than yours. Lets hope that means they were also better designed.

VitNick

Joined: Sun Feb 03, 2013 8:47 am
Posts: 302
Vehicle: 92 WT Sierra

Posted: Mon Mar 27, 2017 3:45 pm

I'll have a measure of them once I have them in hand. So I should have a measure of the circlip groove O.D and a few points of the shafts along their length. Would it be worth running them between centers and checking for runout/ ovalness? Cylindrical grinder can fix the ovalness if any and if there's enough material.

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Tue Mar 28, 2017 10:05 am

just run them till they break and buy replacements from me

henno

I live here!

Joined: Tue Jul 23, 2013 5:56 pm
Posts: 2439
Location: Brisbane
Vehicle: Which one?

Posted: Tue Mar 28, 2017 12:45 pm

tanshi wrote:

just run them till they break and buy replacements from me

Do that. The rest of the kit is worth the 200 bucks, so the axles are basically freebies.

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Tue Mar 28, 2017 3:47 pm

Totally agree.

VitNick

Joined: Sun Feb 03, 2013 8:47 am
Posts: 302
Vehicle: 92 WT Sierra

Posted: Tue Mar 28, 2017 5:53 pm

Will do, time to start finding the rest of the required bits

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Tue Mar 28, 2017 6:13 pm

I don't see why they would break at the circlip, no load is outside there

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

jdk81

Joined: Sat Jul 18, 2009 11:30 pm
Posts: 2372
Location: Ballarat, VIC

Posted: Tue Mar 28, 2017 6:31 pm

Look again?

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Tue Mar 28, 2017 6:52 pm

Yep yep, did pay too much attention pulling the off ha

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Thu Mar 30, 2017 7:47 pm

This still availiable? Or did it end up selling like the first post says?

_________________
back in a built sierra!

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Fri Mar 31, 2017 6:20 am

just_cruizin wrote:

Sold

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Sat Apr 01, 2017 4:57 pm

Bugger

_________________
back in a built sierra!

Page 1 of 1

[ 16 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum