[Saam]

well when i get a new diff housing, if i get a job... lol.. i will have to set up my mounts and everything on it again.

i was just wondering if jimny springs are different left and right in the front to make up for the lean ? or do jimny's not have a lean ?

anyways i had to make one coil seat higher than the other to make up for the lean in my coily when i set up the seperate coil and shock. and i actually had to put a 15mm spacer later on aswell

thoughts ?

[parfittron]

yea there is a difference in lengths for sure, not sure as to how much though. I actually thought from memory that the spring lengths may have been same in front - with a longer drivers rear, however I cant remember now

[joeblow]

same front lengths, different rear lengths.

[Saam]

hmm any thoughts on what my other options could be, probably no way of telling if jimny rears would work..

[Saam]

you've done coils before joe how do you deal with the lean ?

[Saam]

ideas ?

[Gwagensteve]

Urethane spring spacer on the heavy side? I've run urethane spacers on the heavy side of my Gwagen fo 10 years and it's been fine.

[joeblow]

known as 'trim packers'. most 4x4 shops will sell em and i do believe arb make em for jimnys.

[Saam]

ah okay so there are no issues with my current setup then ! was not sure if the suspension guru's thought of this as a no go.