auszookers.com • View topic - Jimny won't engage 4WD.

Board index » Talking About Stuff » Suzuki Talk

Jimny won't engage 4WD.

Page 1 of 2

[ 42 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 9:56 am

Took the drive shaft off to repair something and when we put it back on it won't engage 4wd.

Working on it right now...and hints?

It's got vacuum operated hubs.

_________________
09 Jimny Sierra Limited Edition

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 9:57 am

It was working when we took it off.

_________________
09 Jimny Sierra Limited Edition

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 9:58 am

The transfer case sounds like it's doing it's thing.

_________________
09 Jimny Sierra Limited Edition

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 10:04 am

Could it be the way we have lined it up?

Bloody annoying!!

_________________
09 Jimny Sierra Limited Edition

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue Nov 16, 2010 10:05 am

don't they have an earth wire or some other wire that hangs down low? that hasn't been knocked/damaged?

_________________
You're just hating because you don't understand

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 10:10 am

Yeah they do...that has failed in the past and it appears ok.

_________________
09 Jimny Sierra Limited Edition

lordfury007

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Posted: Tue Nov 16, 2010 10:11 am

3 posts in 3 minutes and another post 6 minutes later... there is an 'edit' button you know?

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 10:13 am

It was working fine when my mate was removing the driveshaft and now after putting it back on it doesn't.

We can feel it Engaging the shaft, but te hubs are not locking.

It's booked into Suzuki on Thurs so maybe they can figure it out as we are completely stumped.

I'm not on a PC so it's easier to just re-post.

_________________
09 Jimny Sierra Limited Edition

Last edited by vermin on Tue Nov 16, 2010 10:20 am, edited 2 times in total.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue Nov 16, 2010 10:14 am

sell it.... sure it's not related to the long weight?

_________________
You're just hating because you don't understand

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 10:15 am

Long weight?

_________________
09 Jimny Sierra Limited Edition

lordviper556

Joined: Wed Oct 14, 2009 10:30 pm
Posts: 716
Location: sunny coast qld

Posted: Tue Nov 16, 2010 10:58 am

its a problem with the vacum hubs. its been covered hear heaps of times before.

check this out

http://www.bigjimny.com/images/document ... system.pdf

or just do yourself a favour and fit manual hubs.

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 11:22 am

It appears as if one of the solenoids is damaged after all and is causing it to leak transfer case oil.

It has hit the cat on my exhaust as we towed the car home behind my Friends cruiser.

This will be the 2nd time I have replaced this part.

_________________
09 Jimny Sierra Limited Edition

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue Nov 16, 2010 11:25 am

vermin wrote:

Long weight?

Sorry I've made you wait so long for you long weight.... :wink:

Would it be related to the long wait for parts after the bingle?

_________________
You're just hating because you don't understand

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 11:39 am

It was working off road on Sat, but we didn't fully secure the t/case and now it looks like I am paying the price.

At least we hope that's the problem.

_________________
09 Jimny Sierra Limited Edition

Benz

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 1006
Location: Cervantes WA

Posted: Tue Nov 16, 2010 12:11 pm

hmm manual hub time?

vac hubs are so nice though! i love not having to get out of the car!

kamron80

Joined: Mon Feb 18, 2008 10:30 pm
Posts: 20

Posted: Tue Nov 16, 2010 5:08 pm

Check wire coming out of transfer case, had the same problem

lordviper556

Joined: Wed Oct 14, 2009 10:30 pm
Posts: 716
Location: sunny coast qld

Posted: Tue Nov 16, 2010 7:46 pm

Benz2369 wrote:

hmm manual hub time?

vac hubs are so nice though! i love not having to get out of the car!

u gotta get out to air down anyway so just lock he hubs in then.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Tue Nov 16, 2010 7:55 pm

Have you tried moving the car a lil bit??

It selects useing an electric lil motor, if the gear's are not lined up it give's up just to piss you off..

_________________
I used to be indecisive,
now I'm not so sure.....

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 9:54 pm

Yeah we tried moving the car back and forward...also drive around it a bit.

This solenoid that I replaced already is leaking oil and the cap covering it has mostly sheered off from an impact on my cat (exhaust).

I am sure this is what it must be...otherwise it's off to a Suzuki specialist for further investigation.

_________________
09 Jimny Sierra Limited Edition

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 16, 2010 10:01 pm

This is the part I am talking about.

You do not have the required permissions to view the files attached to this post.

_________________
09 Jimny Sierra Limited Edition

kamron80

Joined: Mon Feb 18, 2008 10:30 pm
Posts: 20

Posted: Wed Nov 17, 2010 12:58 am

Thats exactly what happen to mine, suzuki charged $180 to replace it and that was under warranty!! They stated that it wasn't "natural causes", "what?, to a critical wire not protected by a bash plate?", I keep the damaged one in my garage to whinge to ppl about my little experience. F*#kin electronic cases!!

BertZook

az supporter

Joined: Wed May 26, 2010 3:01 am
Posts: 2979
Location: Sunshine Coast
Vehicle: Jimny, 45mm lift, 235's tyres

Posted: Wed Nov 17, 2010 1:37 am

lordviper556 wrote:

Benz2369 wrote:

hmm manual hub time?

vac hubs are so nice though! i love not having to get out of the car!

u gotta get out to air down anyway so just lock he hubs in then.

+1

another reason why I bought my Jimny with a manual trasfer... I dnt trust in push buttons :wink:

_________________
"BertZook's Jimny needs mods fundraiser"

dm90

Joined: Sun Nov 29, 2009 10:30 pm
Posts: 4349
Location: Perth

Posted: Wed Nov 17, 2010 2:12 am

BertZook wrote:

lordviper556 wrote:

Benz2369 wrote:

hmm manual hub time?

vac hubs are so nice though! i love not having to get out of the car!

u gotta get out to air down anyway so just lock he hubs in then.

+1

another reason why I bought my Jimny with a manual trasfer... I dnt trust in push buttons :wink:

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Wed Nov 17, 2010 6:05 am

vermin wrote:

Good thinking!!!

_________________
I used to be indecisive,
now I'm not so sure.....

lordviper556

Joined: Wed Oct 14, 2009 10:30 pm
Posts: 716
Location: sunny coast qld

Posted: Wed Nov 17, 2010 8:52 am

i got a manual transfer as well, also put manual hubs on casue mine bugged up. been workin fine ever scince

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Thu Nov 18, 2010 5:53 am

Yup Suzuki can confirm that my solenoid is again damaged!

Got my gearbox seal replaced under warranty and it's off to Suzistore on Mon for a service and to replace the solenoid.

_________________
09 Jimny Sierra Limited Edition

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Nov 18, 2010 6:21 am

vermin wrote:

Yup Suzuki can confirm that my solenoid is again damaged!

Got my gearbox seal replaced under warranty and it's off to Suzistore on Mon for a service and to replace the transfer with a stick opperated one!!

Good thinking!!!!

_________________
I used to be indecisive,
now I'm not so sure.....

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Thu Nov 18, 2010 8:32 am

Out of interest what's the cost and work involved with doing that?

_________________
09 Jimny Sierra Limited Edition

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Thu Nov 18, 2010 8:34 am

vermin wrote:

Out of interest what's the cost and work involved with doing that?

From what i have read ya just need the tranfer case and to cut a hole in your floor to do it

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Nov 18, 2010 8:36 am

Joe wrote:

vermin wrote:

Out of interest what's the cost and work involved with doing that?

From what i have read ya just need the tranfer case and to cut a hole in your floor to do it

& it's already marked out!!!!

_________________
I used to be indecisive,
now I'm not so sure.....

Page 1 of 2

[ 42 posts ]

Go to page 1, 2 Next

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 286 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum