auszookers.com • View topic - 4.6 Vitara or 4.8 GV diff gears

Board index » Shift It And Find It » I Want it I Want it I want it

4.6 Vitara or 4.8 GV diff gears

Page 1 of 1

[ 23 posts ]

Print view

Previous topic | Next topic

Author

Message

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Wed Mar 02, 2011 6:51 am

as above. for front and rear. what you got.

B4T

_________________
B4T

Built by me to be driven like a rental

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Wed Mar 02, 2011 6:57 am

I have a 4.6 front diff here. Removed from SV420.

$150 for complete diff centre.

_________________
2013 GV
1998 SV420 ute

experament-u2

Joined: Thu Feb 05, 2009 10:30 pm
Posts: 267
Location: Adelaide
Vehicle: 98 Maruti

Posted: Wed Mar 02, 2011 7:14 am

i have a pair of stock GV diffs
sorry not sure if they are 4.8s or not

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Mar 02, 2011 7:37 am

doesn't the GV already have 4.6's or 4.8's fitted standard?

_________________
You're just hating because you don't understand

shabz

az supporter

Joined: Sun May 03, 2009 11:30 pm
Posts: 646
Location: Melbourne

Posted: Wed Mar 02, 2011 7:53 am

atari4x4 wrote:

doesn't the GV already have 4.6's or 4.8's fitted standard?

Standard is 4.3 manual and 4.8 auto...thats the v6, not sure about the 4cyl.
B4T has a manual.

_________________
My Grand Vitara

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Mar 02, 2011 8:06 am

shabz wrote:

atari4x4 wrote:

doesn't the GV already have 4.6's or 4.8's fitted standard?

Standard is 4.3 manual and 4.8 auto...thats the v6, not sure about the 4cyl.
B4T has a manual.

well i learned something new today.

_________________
You're just hating because you don't understand

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Wed Mar 02, 2011 8:10 am

I have a 4.6 rear here.... in an 89 auto SWB vit.

Mugwui

Joined: Tue Nov 04, 2008 10:30 pm
Posts: 1241
Location: Antarctica!

Posted: Wed Mar 02, 2011 8:21 am

experament-u2 wrote:

i have a pair of stock GV diffs
sorry not sure if they are 4.8s or not

What did they come out of?

2.5 V6 - defiantly 4.3, I have a front R & P with center left over out of mine.

_________________
If your not breaking shit, try harder!!!

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Wed Mar 02, 2011 8:32 am

to clarafy things a bit.

early 1.6swb GV's had 5.12
2.0l man gv = 4.8
2.0l auto GV = 5.12
2.5 V6 man = 4.3
2.5 V6 auto = 4.8.

Mine is a 2.5 V6 manual and im trying to correct gearng lost from fitting bigger tyres. Vit 4.6 gears will get it right but if i go up one more size they will be out again. so i'd really like some 4.8's.

I will swap the 5.12 gears ive got if you want to re-gear your GV.

Cheers.

_________________
B4T

Built by me to be driven like a rental

Last edited by Built4thrashing on Wed Mar 02, 2011 8:55 am, edited 1 time in total.

shabz

az supporter

Joined: Sun May 03, 2009 11:30 pm
Posts: 646
Location: Melbourne

Posted: Wed Mar 02, 2011 8:42 am

atari4x4 wrote:

shabz wrote:

atari4x4 wrote:

doesn't the GV already have 4.6's or 4.8's fitted standard?

Standard is 4.3 manual and 4.8 auto...thats the v6, not sure about the 4cyl.
B4T has a manual.

well i learned something new today.

You're welcome :wink:

_________________
My Grand Vitara

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Wed Mar 02, 2011 8:56 am

Sorry I mis-interpreted you post.

So you want a front and rear 4.6 ratio diff to fit to a GV....

I have a matching pair here from the SV wreck. I have not removed the rear to inspect, but iw was not noisy at all, so I would assume its good. Probably a 12 bolt though.

_________________
2013 GV
1998 SV420 ute

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Wed Mar 02, 2011 9:16 am

Front needs to be 10 bolt. not sure on the rear but i assume its the same. (10bolt)

_________________
B4T

Built by me to be driven like a rental

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Wed Mar 02, 2011 9:19 am

Built4thrashing wrote:

Front needs to be 10 bolt. not sure on the rear but i assume its the same. (10bolt)

All fronts are 10 bolts aren't the?

_________________
2013 GV
1998 SV420 ute

gregdixon

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 1017
Location: Perth
Vehicle: 2004 SQ625 GV

Posted: Wed Mar 02, 2011 9:40 am

GV's have 10 bolt front and 12 bolt rears. The SV rear diff from Ninjamoses SV was 12 also. So the 4.6's should go straight onto the GV centers

ninjamoses

az supporter

Joined: Mon Aug 13, 2007 11:30 pm
Posts: 1787
Location: Butler, WA

Posted: Wed Mar 02, 2011 2:04 pm

If you are wanting the complete centres I can't help, but I've got a front and rear set of 4.6 R&Ps out of my SV if you are interested? Not sure how much they'd be worth, say $250 for both?

Front is 10 bolt, rear is 12.

_________________
Moses' SQ625 GV Pig

shabz

az supporter

Joined: Sun May 03, 2009 11:30 pm
Posts: 646
Location: Melbourne

Posted: Thu Mar 03, 2011 6:18 am

I though only the early model 3spd autos had 4.625 R&P ratios

Ninja yours is manual yeah?

_________________
My Grand Vitara

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Thu Mar 03, 2011 6:23 am

shabz wrote:

I though only the early model 3spd autos had 4.625 R&P ratios

Ninja yours is manual yeah?

You'de be wrong :wink:

1.6 4sp auto, 2.0 man J20, 2.0 H20 man all 4.6 ratios. Auto SV's may also be 4.6?

_________________
2013 GV
1998 SV420 ute

shabz

az supporter

Joined: Sun May 03, 2009 11:30 pm
Posts: 646
Location: Melbourne

Posted: Thu Mar 03, 2011 6:27 am

Fatzook wrote:

shabz wrote:

I though only the early model 3spd autos had 4.625 R&P ratios

Ninja yours is manual yeah?

You'de be wrong :wink:

1.6 4sp auto, 2.0 man J20, 2.0 H20 man all 4.6 ratios. Auto SV's may also be 4.6?

Would that mean that they all 10 bolt front and 12 bolt rear aswell? if so straight swap into GV diffs?

Sorry not meaning to hijack....just learning stuff

_________________
My Grand Vitara

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Thu Mar 03, 2011 7:02 am

shabz wrote:

Fatzook wrote:

shabz wrote:

I though only the early model 3spd autos had 4.625 R&P ratios

Ninja yours is manual yeah?

You'de be wrong :wink:

1.6 4sp auto, 2.0 man J20, 2.0 H20 man all 4.6 ratios. Auto SV's may also be 4.6?

Would that mean that they all 10 bolt front and 12 bolt rear aswell? if so straight swap into GV diffs?

Sorry not meaning to hijack....just learning stuff

This is good to know as im starting to seach for what i need. 4.6 vit gears seem easier to find then 4.8 GV gears. when i do the swap ill be putting a lockright in the rear.

_________________
B4T

Built by me to be driven like a rental

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Thu Mar 03, 2011 7:07 am

I'm prettysure all of the SE416's were 10 bolt rears. I think the SV series were the first 12 bolt rears. Could be wrong though

_________________
2013 GV
1998 SV420 ute

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Mar 03, 2011 7:30 am

Fatzook wrote:

I'm prettysure all of the SE416's were 10 bolt rears. I think the SV series were the first 12 bolt rears. Could be wrong though

Joe wrote:

Mid 94 onwards they changed to 12 bolt

_________________
You're just hating because you don't understand

CairnsZook

az supporter

Joined: Tue Jul 18, 2006 11:30 pm
Posts: 872
Location: West Coast
Vehicle: Zookless

Posted: Fri Mar 18, 2011 8:20 am

I've got some X90 4.875:1 diffs.

If the R&P's will fit I'll pull them out for you.

scorpydude

Joined: Mon Nov 01, 2010 9:47 am
Posts: 286
Location: South East Brisbane
Vehicle: 02 GV SQ625 + 84 Sierra SJ410

Posted: Tue Apr 05, 2011 3:42 am

I'm after 5.12 steel diff centres (front and back) for my 02 Manual V6 GV.

If anyone has any to sell or knows where to get some please PM.

Page 1 of 1

[ 23 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum