auszookers.com • View topic - Holley/Webber On 1.3

Board index » Talking About Stuff » Suzuki Talk

Holley/Webber On 1.3

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

joel88

Joined: Tue Mar 08, 2011 8:22 am
Posts: 48
Location: Burpengary

Posted: Sat Mar 12, 2011 12:51 am

Hey guys just bought a lwb zook it has a holley/webber 180 i think it is not sure weither to rebuild that or i have to stanard 1.3 carby wich is better. As i do alot of highway driving and beach and bush 4wding..

Need your help guys cheers joel

S13RR4

Joined: Sat Aug 22, 2009 11:30 pm
Posts: 1072
Location: Sunshine Coast

Posted: Sat Mar 12, 2011 12:54 am

people with webbers have had problems on steep inclines.

But if its used lots on highway and beach (where there's no angles) then I would keep the webber. It will give better on road performance

_________________
My Rig --> Click WWW

mr_ron

az supporter

Joined: Fri Jan 28, 2011 8:16 am
Posts: 279
Location: Beenleigh, Qld
Vehicle: Vitara

Posted: Sat Mar 12, 2011 12:56 am

Webbers dont tend to like hills moreso then most other carbies.
stock carbies are pretty well matched to the motor but lack oomf but will allow you to run a snorkel easier and i think you will get better fuel economy from a stock one.(someone correct me if i'm wrong)

but, I'd personally go the Holley 180 (I have one in the box new waiting to go on

) more go to them and they can handle hills better then the webber 32/36 I have..

Ron

_________________
Repping it, High Top style!

joel88

Joined: Tue Mar 08, 2011 8:22 am
Posts: 48
Location: Burpengary

Posted: Sat Mar 12, 2011 12:58 am

ok cause atm its flooding on level ground and leaking fuel everywhere i went a bought a 1.3 carby today but still not sure cuase this one needs a kit put through it aswell.

joel88

Joined: Tue Mar 08, 2011 8:22 am
Posts: 48
Location: Burpengary

Posted: Sat Mar 12, 2011 1:07 am

can you post a pic of your holley please

mr_ron

az supporter

Joined: Fri Jan 28, 2011 8:16 am
Posts: 279
Location: Beenleigh, Qld
Vehicle: Vitara

Posted: Sat Mar 12, 2011 1:08 am

well since youve already got the webber, check out what the price difference in rebuild kits are. Chances are the 1.3 carby could have more wrong with it then the (newer?) Webber and the rebuild kits From what i looked at were easier to get, some stores stock the webber rebuild kits on the shelf..

_________________
Repping it, High Top style!

SuziBlu

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Posted: Sat Mar 12, 2011 1:22 am

_________________
Bad decisions make good stories.

joel88

Joined: Tue Mar 08, 2011 8:22 am
Posts: 48
Location: Burpengary

Posted: Sat Mar 12, 2011 1:52 am

ok well ill look into getting the webber fixed as i have the extractors and 2 inch now the carby has holley stamped in the side does that matter?

joel88

Joined: Tue Mar 08, 2011 8:22 am
Posts: 48
Location: Burpengary

Posted: Sat Mar 12, 2011 1:59 am

I forgot to mention its running a electric fuel pump will that matter

shakes

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Posted: Sat Mar 12, 2011 2:29 am

joel88 wrote:

I forgot to mention its running a electric fuel pump will that matter

only if it doesnt have a pressure reg... webers like around 4psi from memory (my memory is wayyy fuzzy so thats not gospel)

mr_ron

az supporter

Joined: Fri Jan 28, 2011 8:16 am
Posts: 279
Location: Beenleigh, Qld
Vehicle: Vitara

Posted: Sat Mar 12, 2011 2:36 am

joel88 wrote:

ok well ill look into getting the webber fixed as i have the extractors and 2 inch now the carby has holley stamped in the side does that matter?

Its not a webber then?. Holley and Webber are 2 different makers..

_________________
Repping it, High Top style!

SuziBlu

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Posted: Sat Mar 12, 2011 3:03 am

The 32/36 webber, and the 180 holley are basically identical.

Shakes is right, 4psi max.

_________________
Bad decisions make good stories.

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Sun Mar 13, 2011 5:20 am

Hi All, Are Webbers on 1.3lt Sierra's street legal in NSW please - IE will they pass a BLUE slip inspection?

Tony

_________________
Old farts sometimes know some stuff you don't.

Page 1 of 1

[ 13 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 273 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum