auszookers.com • View topic - Vitara dizzy sensor

Board index » Shift It And Find It » I Want it I Want it I want it

Vitara dizzy sensor - I'm desparate now

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Sun Feb 24, 2013 7:11 pm

Im after the sensor from the dizzy. New or used I dont care.

Its from a 92 16B vit engine

Last edited by burls on Tue Aug 05, 2014 6:40 pm, edited 3 times in total.

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Mon Feb 25, 2013 10:41 am

What's up with that one mate? These are one of the most robust sensors out there! Only real way to kill them is with physical impact. If it is actually buggered you can also source them out of 1.3L dizzy's. Just have to remove the ignition coil amplifier which is also soldered on.

Dan

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Mon Feb 25, 2013 8:38 pm

One of the wires is chopped and I didnt want to have joins in them (just another place to get a defect)

Last edited by burls on Tue Feb 26, 2013 7:30 pm, edited 1 time in total.

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Mon Feb 25, 2013 8:44 pm

burls wrote:

(just another place to get a defect)

Defect? If you doing the engine conversion you will have other joins and cuts in the wiring. If soldered properly and covered in heat shrink you wont have any issues. If your not up to that I'm sure I could help you out.

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Tue Feb 26, 2013 7:29 pm

I'm up to it no worries about that and that's what I will do if I cant get one, thanks for the offer though. I just dont like soldering joints in the bay where it can get hot

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Mon Jul 28, 2014 4:45 pm

I need another one of these due to destroying it on the weekend.

I cant even find one online

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Tue Aug 05, 2014 2:46 pm

I tried a sierra one but they are mirror image and cant be made to fit.

I would consider a whole distributor or even and engine if it comes to that

PM me with your options

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Tue Aug 05, 2014 8:36 pm

Can you post up some pics of the sierra dizzy/module and vit dizzy/module

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Wed Aug 06, 2014 6:21 am

Only if you have a spare vit one you can off load ha ha.

I'll do it when I get home

burls

az supporter

Joined: Sun Mar 07, 2010 10:30 pm
Posts: 989
Location: Ipswich
Vehicle: 95 sj70 and 78 lj81

Posted: Sat Aug 09, 2014 3:09 pm

It worked, I used the coil from the sierra dizzy so I don't need one anymore

now time to go wheeling

Page 1 of 1

[ 10 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum