It is currently Sun Jul 26, 2026 4:03 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 12 posts ] 
Author Message

Offline
I live here!
I live here!
User avatar

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Post Posted: Sun May 14, 2017 4:01 pm 
Reply with quote Top  
G'day AZ Image
I'm looking at swapping my SJ80 softtop body onto a NT 1.3 chassis i know the body mounts line up but is there anything else i need to be aware of?
Also for a legal point of view am i aloud to do this? and will it need to be re registered or can i just use the rego from the SJ80?

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

 Profile  

Offline
az supporter
az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Post Posted: Sun May 14, 2017 7:14 pm 
Reply with quote Top  
You'll have to comply to the emissions standard of the 80. Using the new body you should be right. You'll need to comply to all ADRs of the later model.

_________________
greenzook89 wrote:
31zook wrote:
Makes me want something similar

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Sun May 14, 2017 7:35 pm 
Reply with quote Top  
Surely you could get the links re-jigged with wt diffs for less effort and more gain ?

_________________
...

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Post Posted: Sun May 14, 2017 7:58 pm 
Reply with quote Top  
MrRocky wrote:
Surely you could get the links re-jigged with wt diffs for less effort and more gain ?


That was the plan but my mate who does my welding is moving away so unless it all gets done in one weekend i end up left with out a car :(
This way i can take my time and build the chassis up with ruf WT diffs have it all done and rolling then in one weekend swap my body and motor/gearbox over :D

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Sun May 14, 2017 8:06 pm 
Reply with quote Top  
Cant just slap a jimny diff in the front ?

_________________
...

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Sun May 14, 2017 8:08 pm 
Reply with quote Top  
Just seems alot of effort, how often are you wanting to do harder stuff, gears and a rear locker will make it pretty capable and alot more legal.

_________________
...

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Post Posted: Sun May 14, 2017 10:55 pm 
Reply with quote Top  
Jimny diff won't just "bolt in" still needs fab work and is still made of cheese :lol:
Have been out only a hand full off times but want to get out more and do harder/funner stuff and build it to be reliable and stronger.

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

 Profile  

Offline
User avatar

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Post Posted: Mon May 15, 2017 7:44 am 
Reply with quote Top  
You're almost better off buying that NT and leaving it NT bodied then trailering it out to tracks and beating the shit out of it. This way you're not paying rego, doesn't matter if you break it and you'll have more fun not worried about damaging your DD?

_________________
Image

 Profile  

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Mon May 15, 2017 8:02 am 
Reply with quote Top  
I think its the nt spring spacing on wt diffs joe is after, you can build it tough enough for weekend thrashing and daily driving pretty easy in wa, theres not really the need for a bigger tyre than a 31 unless u drive mud puddles.
You probably are better off buying a leafy and swapping motors then flogging the coily off. Dont get to caught up on the whole nt spacing on wt diffs thing you will run out of wheelbase before it becomes a relevant mod. Lockers, front chromos, gearing and 31"s will have u drive every track from bobs hill to the powerlines

_________________
...

 Profile  

Offline
User avatar

Joined: Thu Aug 18, 2016 1:47 pm
Posts: 324
Location: Under a car in Brisbane scratching my head
Vehicle: Sierra g16 efi..and Sierra GTi

Post Posted: Mon May 15, 2017 8:27 am 
Reply with quote Top  
We will soon have a coily soft top body going cheap... PM for pics etc...

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Sep 06, 2009 11:30 pm
Posts: 2591
Location: Ipswich
Vehicle: LJ80V-II, SJ40, SJ40T, RS415

Post Posted: Mon May 15, 2017 11:18 am 
Reply with quote Top  
Joe it sounds like you were in the exact position I was with my Coily. I looked at heaps of options and the easiest (for me) was to build up a WT to suit what i wanted to do.

You could swap the bodies over but as the frame number is stamped on the chassis this would mean new rego. (For it to be tip top legal)

_________________
31zook wrote:
Makes me want something similar

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5935
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Post Posted: Tue May 16, 2017 12:41 am 
Reply with quote Top  
When I asked a few years back....

As far as dot are concerned, the chassis is the car no matter what body you put on it. To be legal you'l have to be regoed as the chassis. But you're not going to be legal anyway.....

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 50 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours